Lights

1. Hardware

• Light Strands
• Power Supply
• Arduino Nano
• Raspberry Pi and equipment
• Wires, 470 ohm resistor, 1000 uF Capacitor, and heat shrink

2. Hardware Setup

• Assemble power filter and connect to arduino

• Attach filter and contoll to lights to align polarity use plug/wire extensions

• Connect wires to the power supply screw terminals making sure to align the polarity

• Connect nano via USB to the Pi

3. Software Setup

• Setup the Pi to connect remotely
• Install arduino IDE
• Add Adafruit NeoPixel Library
• Open strandtest example from the custom libraries and upload

4. Install

• Plug in power supply
• Tweak software and repeat...

5. To do

• Add audio commands
• Play music
• Add choreography orchestration
• Install outside