Lights

1. Hardware

Light Strands
Power Supply
Arduino Nano
Raspberry Pi and equipment
Wires, 470 ohm resistor, 1000 uF Capacitor, and heat shrink

2. Hardware Setup

Assemble power filter and connect to arduino
Attach filter and contoll to lights to align polarity use plug/wire extensions
Connect wires to the power supply screw terminals making sure to align the polarity
Connect nano via USB to the Pi

3. Software Setup

Setup the Pi to connect remotely
Install arduino IDE
Add Adafruit NeoPixel Library
Open strandtest example from the custom libraries and upload

4. Install

Plug in power supply
Tweak software and repeat...

5. To do

Add audio commands
Play music
Add choreography orchestration
Install outside