Implemented Switch Device for support of smartswitch #1840
Conversation
Used VRM instance in product name and corrected channel numbering to start from 1
poped pageManager back to setting on device disconnect
|
Hi @CJhuckstepp , do you have an installation with a smartswitch connected to the vrm portal? If so, could you please add [email address removed] to the 'users' of your installation so we can test your changes? |
|
An example of an installation with two smartswitchs connected is running and available on the vrm . However I have found that after copying the WASM build by the github action to the /var/www/venus/gui-beta directory. The remote console option is no longer available, but it working ok when connecting to the web server locally. Is there anything else I need to do. It has been rebooted multiple times. |
Hi @CJhuckstepp , this is a known issue, it will be fixed in the next release. We added a watchdog to gui-v2 that talks to index.html. VRM uses its own index.html, and needs to be updated. So, wasm builds work ok locally, but not via vrm. |
Resolved dimming percentage not showing below the 8V input active threshold
renamed item fuse to FuseRating and used item min max to limit input
|
A demo system with two smartswitch on it should now be avaliable on the vrm. Invite sent to requested email address. |
|
hey @CJhuckstepp can you send an invite to me as well? thank you |
Implemented request to display "press" when momentary switch in off state Remove unused code from Switchdev Remove commented out code
|
Are they any comments or improvment that I can start implimenting |
|
Hi Colin, Matthijs said that he would take a look (probably in consultation with Serj the designer) and then provide some feedback about the UI / UX design pieces. After that (and assuming that some changes will be made, related to that feedback), we will provide more technical feedback on the implementation. (We figured that if there were some look-and-feel changes to be made, it might affect the implementation anyway, so in-depth technical feedback at this point might be a bit premature.) |
Add Aux button in status bar to access Aux card page similar to the control cards for third party device. Then the card Groups are added based on the switches group name or if not present the devices name.
Setting added to allow configuration of the switch. With the PWM item indicating if the diming mode is available.