afs setup_emutos

EmuTOS

Just like TOS, edit the config file, in the [GLOBAL] section, you'll get the EmuTOS= line to fill with the complete path to a EmuTOS ROM image file. If you have both TOS and EmuTOS available, ARAnyM defaults to TOS. You can force EmuTOS usage using -e command-line parameter:

  $ aranym -e
  ARAnyM 0.9.2pre1
  Using config file: '/home/patrice/.aranym/config'
  [snip]
  EmuTOS 2005/09/18 loading from '/usr/local/share/atari-emu/emutos-0.8.1-512k.img'... [OK]
  NVRAM loaded from '/home/patrice/.aranym/nvram'
  TunTap(0): ERROR: aratapif not found. Ethernet disabled!
  TunTap(0): ERROR: aratapif not found. Ethernet disabled!
  BIOS: Detected memory: ST-RAM = 14 MB, FastRAM = 0 MB
  BDOS: Address of basepage = 00013000
  BDOS: cinit - osinit successful ...
  Floppy read(-1, 009fcc, 1) failed.
  hdv_boot returns 3

There you get the EmuTOS boot screen, pressing any key provides this crash.

  Panic: bus error. misc = 0x2000, address = 0x00e01254
  opcode = 0x7008, sr = 0x602e, pc = 0x02060000
  Aregs: 602e0206 00e2bdac 00018a40 00018c74  00000000 00014a90 000151da 00015144
  Dregs: 0000046c 00000004 0000001c 00000000  00000000 00000000 00000000 00000000
  Processor halted.

This crash is caused by a bug in the function that translates EmuTOS character strings into your language. So you'd better use an EmuTOS compiled only with english language.