Statefull_validation_pyATS

Creating Havoc

-- interface ethernet 0/2 on R6-200 has been shutdown to demonstrate a network change

State Difference found ->

#pyats diff good1 bad1

--- good1/interface_ios_R6-200_ops.txt
+++ bad1/interface_ios_R6-200_ops.txt
info:
 Ethernet0/2:
-  accounting: 
-   arp: 
-    chars_in: 300
-    chars_out: 300
-    pkts_in: 5
-    pkts_out: 5
-   cdp: 
-    chars_in: 8382
-    chars_out: 8382
-    pkts_in: 22
-    pkts_out: 22
-   dec mop: 
-    chars_in: 154
-    chars_out: 154
-    pkts_in: 2
-    pkts_out: 2
-   ip: 
-    chars_in: 15783
-    chars_out: 15799
-    pkts_in: 175
-    pkts_out: 175
-   other: 
-    chars_in: 0
-    chars_out: 6420
-    pkts_in: 0
-    pkts_out: 107
+  enabled: False
-  enabled: True
+  oper_status: down
-  oper_status: up

--- good1/ospf_ios_R6-200_ops.txt
+++ bad1/ospf_ios_R6-200_ops.txt
info:
 vrf:
  default:
   address_family:
    ipv4:
     instance:
      1:
       areas:
        0.0.0.0:
         interfaces:
          Ethernet0/2:
+           enable: False
-           enable: True
-           lls: True
-           neighbors: 
-            5.5.5.5: 
-             address: 192.168.1.1
-             bdr_ip_addr: 192.168.1.1
-             dead_timer: 00:00:36
-             dr_ip_addr: 192.168.1.2
-             neighbor_router_id: 5.5.5.5
-             state: full
-             statistics: 
-              nbr_event_count: 6
-              nbr_retrans_qlen: 0
-           passive: False

pyATS docs

https://developer.cisco.com/docs/pyats/