bittnt

Bing/LICENSE

@@ -0,0 +1,27 @@
+Copyright (c) 2014, Ming-Ming Cheng & Shuai Zheng
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright notice, this
+  list of conditions and the following disclaimer.
+
+* Redistributions in binary form must reproduce the above copyright notice,
+  this list of conditions and the following disclaimer in the documentation
+  and/or other materials provided with the distribution.
+
+* Neither the name of the {organization} nor the names of its
+  contributors may be used to endorse or promote products derived from
+  this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Bing/README.md

@@ -0,0 +1,63 @@
+Objectness Proposal Generator with BING
+==========
+BING Objectness proposal estimator Linux Ubuntu 14.04/Mac OSX Yosemite/iOS 8.1 version implementation, 
+runs at 1000 FPS at a Dell 7600 workstation with Linux Ubuntu 14.04.
+## INSTALL
+To make this program running fast, you need to enable release mode: 
+> cmake -DCMAKE_BUILD_TYPE=Release ../
+
+## DEMO
+If you run this in Ubuntu 14.04 or other similar Linux system, feel free to 
+change the path in main.cpp
+> DataSetVOC voc2007("YOUR_PATH_TO_THE_VOC2007DATA");
+
+Notice that WinRecall.m is generated by this code, you do not need them. If you
+want to make this code working with other datasets, one simple solution is to 
+make the folders similar to the VOC 2007 one.
+
+## Introduction
+This is the 1000 FPS BING objectness linux version library for efficient 
+objectness proposal estimator,We would appreciate if you could cite and refer to 
+the papers below.
+```
+@inproceedings{BingObj2014,
+  title={{BING}: Binarized Normed Gradients for Objectness Estimation at 300fps},
+  author={Ming-Ming Cheng and Ziming Zhang and Wen-Yan Lin and Philip H. S. Torr},
+  booktitle={IEEE CVPR},
+  year={2014},
+}
+```
+```
+@inproceedings{depthobjectproposals_GCPR2015, 
+author = {Shuai Zheng and Victor Adrian Prisacariu and Melinos Averkiou and Ming-Ming Cheng and Niloy J. Mitra and Jamie Shotton and Philip H. S. Torr and Carsten Rother}, 
+title = {Object Proposal Estimation in Depth Images using Compact 3D Shape Manifolds}, 
+booktitle = {German Conference on Pattern Recognition (GCPR)},
+year = {2015} 
+}
+```
+The original author Ming-Ming Cheng has already released the source code for 
+windows 64-bit platform. In this library, we intend to release the code for the 
+linux/mac/iOS users. You can maintain the code with Qt Creator IDE.
+
+Please find the original windows code / FAQ / Paper from this link:
+http://mmcheng.net/bing/
+
+## FAQ
+In order to make the code running as the original version in windows, you need
+to download the images/annotations PASCAL VOC 2007 data from the website.
+(http://pascallin.ecs.soton.ac.uk/challenges/VOC/voc2007/#testdata)
+
+We have tested the code, it produces the same accuracy results as the original windows
+version, while it runs at 1111 FPS(frame per second) at Ubuntu 12.04 with a Dell T7600 
+workstation computer, which has two Intel Xeon E5-2687W (3.1GHz, 1600MHz) and 64 GB 
+1600MHz DDR3 Memory.
+
+## Author Info
+Author: Ming-Ming Cheng [email protected]
+Linux Author: Shuai Zheng (Kyle) [email protected]
+Please find more information from http://kylezheng.org/objectproposal/
+Date: 19, February 
+
+## License
+BSD license.
+

Bing/Src/CMakeLists.txt

@@ -0,0 +1,30 @@
+project(BING_linux)
+cmake_minimum_required(VERSION 2.8)
+
+find_package(OpenMP REQUIRED)
+
+# compile LibLinear
+include_directories("LibLinear")
+file(GLOB SOURCES "LibLinear/*.cpp" "LibLinear/blas/*.c")
+add_library(LibLinear STATIC ${SOURCES})
+
+#OPENCV
+#include_directories(/usr/local/include)
+#link_directories(/usr/local/lib)
+##if this does not work, then try to uncomment the things below.
+find_package( OpenCV REQUIRED )
+if(OpenCV_FOUND)
+ include_directories( ${OpenCV_INCLUDE_DIRS} )
+endif( OpenCV_FOUND )
+list( APPEND CMAKE_CXX_FLAGS "-std=c++0x ${CMAKE_CXX_FLAGS} -fopenmp -ftree-vectorize")
+#list( APPEND CMAKE_CXX_FLAGS "-std=c++0x ${CMAKE_CXX_FLAGS} -fopenmp -ftest-coverage -fprofile-arcs")
+
+# compile BING
+file(GLOB SOURCES "*.cpp")
+add_library(BING STATIC ${SOURCES})
+
+add_executable(${PROJECT_NAME} main.cpp)
+
+set(CMAKE_C_FLAGS_RELEASE "${CMAKE_C_FLAGS_RELEASE} -Wall")
+set(CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} -Wall")
+target_link_libraries(${PROJECT_NAME} opencv_core opencv_imgproc opencv_highgui opencv_imgcodecs ${EXTERNAL_LIBS} BING LibLinear)

Bing/Src/CMakeLists.txt.user

@@ -0,0 +1,176 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE QtCreatorProject>
+<!-- Written by Qt Creator 2.5.2, 2014-02-19T12:29:28. -->
+<qtcreator>
+ <data>
+  <variable>ProjectExplorer.Project.ActiveTarget</variable>
+  <value type="int">0</value>
+ </data>
+ <data>
+  <variable>ProjectExplorer.Project.EditorSettings</variable>
+  <valuemap type="QVariantMap">
+   <value type="bool" key="EditorConfiguration.AutoIndent">true</value>
+   <value type="bool" key="EditorConfiguration.AutoSpacesForTabs">false</value>
+   <value type="bool" key="EditorConfiguration.CamelCaseNavigation">true</value>
+   <valuemap type="QVariantMap" key="EditorConfiguration.CodeStyle.0">
+    <value type="QString" key="language">Cpp</value>
+    <valuemap type="QVariantMap" key="value">
+     <value type="QString" key="CurrentPreferences">CppGlobal</value>
+    </valuemap>
+   </valuemap>
+   <valuemap type="QVariantMap" key="EditorConfiguration.CodeStyle.1">
+    <value type="QString" key="language">QmlJS</value>
+    <valuemap type="QVariantMap" key="value">
+     <value type="QString" key="CurrentPreferences">QmlJSGlobal</value>
+    </valuemap>
+   </valuemap>
+   <value type="int" key="EditorConfiguration.CodeStyle.Count">2</value>
+   <value type="QByteArray" key="EditorConfiguration.Codec">System</value>
+   <value type="bool" key="EditorConfiguration.ConstrainTooltips">false</value>
+   <value type="int" key="EditorConfiguration.IndentSize">4</value>
+   <value type="bool" key="EditorConfiguration.KeyboardTooltips">false</value>
+   <value type="bool" key="EditorConfiguration.MouseNavigation">true</value>
+   <value type="int" key="EditorConfiguration.PaddingMode">1</value>
+   <value type="bool" key="EditorConfiguration.ScrollWheelZooming">true</value>
+   <value type="int" key="EditorConfiguration.SmartBackspaceBehavior">0</value>
+   <value type="bool" key="EditorConfiguration.SpacesForTabs">true</value>
+   <value type="int" key="EditorConfiguration.TabKeyBehavior">0</value>
+   <value type="int" key="EditorConfiguration.TabSize">8</value>
+   <value type="bool" key="EditorConfiguration.UseGlobal">true</value>
+   <value type="int" key="EditorConfiguration.Utf8BomBehavior">1</value>
+   <value type="bool" key="EditorConfiguration.addFinalNewLine">true</value>
+   <value type="bool" key="EditorConfiguration.cleanIndentation">true</value>
+   <value type="bool" key="EditorConfiguration.cleanWhitespace">true</value>
+   <value type="bool" key="EditorConfiguration.inEntireDocument">false</value>
+  </valuemap>
+ </data>
+ <data>
+  <variable>ProjectExplorer.Project.PluginSettings</variable>
+  <valuemap type="QVariantMap"/>
+ </data>
+ <data>
+  <variable>ProjectExplorer.Project.Target.0</variable>
+  <valuemap type="QVariantMap">
+   <value type="QString" key="ProjectExplorer.ProjectConfiguration.DefaultDisplayName">Desktop</value>
+   <value type="QString" key="ProjectExplorer.ProjectConfiguration.DisplayName"></value>
+   <value type="QString" key="ProjectExplorer.ProjectConfiguration.Id">CMakeProjectManager.DefaultCMakeTarget</value>
+   <value type="int" key="ProjectExplorer.Target.ActiveBuildConfiguration">0</value>
+   <value type="int" key="ProjectExplorer.Target.ActiveDeployConfiguration">0</value>
+   <value type="int" key="ProjectExplorer.Target.ActiveRunConfiguration">0</value>
+   <valuemap type="QVariantMap" key="ProjectExplorer.Target.BuildConfiguration.0">
+    <value type="QString" key="CMakeProjectManager.CMakeBuildConfiguration.BuildDirectory">/home/bittnt/BING/BING_beta3/build</value>
+    <value type="QString" key="CMakeProjectManager.CMakeBuildConfiguration.ToolChain">ProjectExplorer.ToolChain.Gcc:{966d53c9-fe6c-4bac-8571-0e5a33bebf05}</value>
+    <value type="QString" key="ProjectExplorer.BuildCOnfiguration.ToolChain">ProjectExplorer.ToolChain.Gcc:{966d53c9-fe6c-4bac-8571-0e5a33bebf05}</value>
+    <valuemap type="QVariantMap" key="ProjectExplorer.BuildConfiguration.BuildStepList.0">
+     <valuemap type="QVariantMap" key="ProjectExplorer.BuildStepList.Step.0">
+      <value type="QString" key="CMakeProjectManager.MakeStep.AdditionalArguments"></value>
+      <valuelist type="QVariantList" key="CMakeProjectManager.MakeStep.BuildTargets"/>
+      <value type="bool" key="CMakeProjectManager.MakeStep.Clean">false</value>
+      <value type="bool" key="ProjectExplorer.BuildStep.Enabled">true</value>
+      <value type="QString" key="ProjectExplorer.ProjectConfiguration.DefaultDisplayName">Make</value>
+      <value type="QString" key="ProjectExplorer.ProjectConfiguration.DisplayName"></value>
+      <value type="QString" key="ProjectExplorer.ProjectConfiguration.Id">CMakeProjectManager.MakeStep</value>
+     </valuemap>
+     <value type="int" key="ProjectExplorer.BuildStepList.StepsCount">1</value>
+     <value type="QString" key="ProjectExplorer.ProjectConfiguration.DefaultDisplayName">Build</value>
+     <value type="QString" key="ProjectExplorer.ProjectConfiguration.DisplayName"></value>
+     <value type="QString" key="ProjectExplorer.ProjectConfiguration.Id">ProjectExplorer.BuildSteps.Build</value>
+    </valuemap>
+    <valuemap type="QVariantMap" key="ProjectExplorer.BuildConfiguration.BuildStepList.1">
+     <valuemap type="QVariantMap" key="ProjectExplorer.BuildStepList.Step.0">
+      <value type="QString" key="CMakeProjectManager.MakeStep.AdditionalArguments">clean</value>
+      <valuelist type="QVariantList" key="CMakeProjectManager.MakeStep.BuildTargets"/>
+      <value type="bool" key="CMakeProjectManager.MakeStep.Clean">true</value>
+      <value type="bool" key="ProjectExplorer.BuildStep.Enabled">true</value>
+      <value type="QString" key="ProjectExplorer.ProjectConfiguration.DefaultDisplayName">Make</value>
+      <value type="QString" key="ProjectExplorer.ProjectConfiguration.DisplayName"></value>
+      <value type="QString" key="ProjectExplorer.ProjectConfiguration.Id">CMakeProjectManager.MakeStep</value>
+     </valuemap>
+     <value type="int" key="ProjectExplorer.BuildStepList.StepsCount">1</value>
+     <value type="QString" key="ProjectExplorer.ProjectConfiguration.DefaultDisplayName">Clean</value>
+     <value type="QString" key="ProjectExplorer.ProjectConfiguration.DisplayName"></value>
+     <value type="QString" key="ProjectExplorer.ProjectConfiguration.Id">ProjectExplorer.BuildSteps.Clean</value>
+    </valuemap>
+    <value type="int" key="ProjectExplorer.BuildConfiguration.BuildStepListCount">2</value>
+    <value type="bool" key="ProjectExplorer.BuildConfiguration.ClearSystemEnvironment">false</value>
+    <valuelist type="QVariantList" key="ProjectExplorer.BuildConfiguration.UserEnvironmentChanges"/>
+    <value type="QString" key="ProjectExplorer.ProjectConfiguration.DefaultDisplayName">all</value>
+    <value type="QString" key="ProjectExplorer.ProjectConfiguration.DisplayName"></value>
+    <value type="QString" key="ProjectExplorer.ProjectConfiguration.Id">CMakeProjectManager.CMakeBuildConfiguration</value>
+   </valuemap>
+   <value type="int" key="ProjectExplorer.Target.BuildConfigurationCount">1</value>
+   <valuemap type="QVariantMap" key="ProjectExplorer.Target.DeployConfiguration.0">
+    <valuemap type="QVariantMap" key="ProjectExplorer.BuildConfiguration.BuildStepList.0">
+     <value type="int" key="ProjectExplorer.BuildStepList.StepsCount">0</value>
+     <value type="QString" key="ProjectExplorer.ProjectConfiguration.DefaultDisplayName">Deploy</value>
+     <value type="QString" key="ProjectExplorer.ProjectConfiguration.DisplayName"></value>
+     <value type="QString" key="ProjectExplorer.ProjectConfiguration.Id">ProjectExplorer.BuildSteps.Deploy</value>
+    </valuemap>
+    <value type="int" key="ProjectExplorer.BuildConfiguration.BuildStepListCount">1</value>
+    <value type="QString" key="ProjectExplorer.ProjectConfiguration.DefaultDisplayName">No deployment</value>
+    <value type="QString" key="ProjectExplorer.ProjectConfiguration.DisplayName"></value>
+    <value type="QString" key="ProjectExplorer.ProjectConfiguration.Id">ProjectExplorer.DefaultDeployConfiguration</value>
+   </valuemap>
+   <value type="int" key="ProjectExplorer.Target.DeployConfigurationCount">1</value>
+   <valuemap type="QVariantMap" key="ProjectExplorer.Target.RunConfiguration.0">
+    <value type="bool" key="Analyzer.Project.UseGlobal">true</value>
+    <valuelist type="QVariantList" key="Analyzer.Valgrind.AddedSuppressionFiles"/>
+    <value type="bool" key="Analyzer.Valgrind.Callgrind.CollectBusEvents">false</value>
+    <value type="bool" key="Analyzer.Valgrind.Callgrind.CollectSystime">false</value>
+    <value type="bool" key="Analyzer.Valgrind.Callgrind.EnableBranchSim">false</value>
+    <value type="bool" key="Analyzer.Valgrind.Callgrind.EnableCacheSim">false</value>
+    <value type="bool" key="Analyzer.Valgrind.Callgrind.EnableEventToolTips">true</value>
+    <value type="double" key="Analyzer.Valgrind.Callgrind.MinimumCostRatio">0.01</value>
+    <value type="double" key="Analyzer.Valgrind.Callgrind.VisualisationMinimumCostRatio">10</value>
+    <value type="bool" key="Analyzer.Valgrind.FilterExternalIssues">true</value>
+    <value type="int" key="Analyzer.Valgrind.NumCallers">25</value>
+    <valuelist type="QVariantList" key="Analyzer.Valgrind.RemovedSuppressionFiles"/>
+    <value type="bool" key="Analyzer.Valgrind.TrackOrigins">true</value>
+    <value type="QString" key="Analyzer.Valgrind.ValgrindExecutable">/usr/bin/valgrind</value>
+    <valuelist type="QVariantList" key="Analyzer.Valgrind.VisibleErrorKinds">
+     <value type="int">0</value>
+     <value type="int">1</value>
+     <value type="int">2</value>
+     <value type="int">3</value>
+     <value type="int">4</value>
+     <value type="int">5</value>
+     <value type="int">6</value>
+     <value type="int">7</value>
+     <value type="int">8</value>
+     <value type="int">9</value>
+     <value type="int">10</value>
+     <value type="int">11</value>
+     <value type="int">12</value>
+     <value type="int">13</value>
+     <value type="int">14</value>
+    </valuelist>
+    <value type="int" key="CMakeProjectManager.BaseEnvironmentBase">2</value>
+    <value type="QString" key="CMakeProjectManager.CMakeRunConfiguation.Title">BING_linux</value>
+    <value type="QString" key="CMakeProjectManager.CMakeRunConfiguration.Arguments"></value>
+    <value type="bool" key="CMakeProjectManager.CMakeRunConfiguration.UseTerminal">false</value>
+    <valuelist type="QVariantList" key="CMakeProjectManager.CMakeRunConfiguration.UserEnvironmentChanges"/>
+    <value type="QString" key="CMakeProjectManager.CMakeRunConfiguration.UserWorkingDirectory"></value>
+    <value type="QString" key="ProjectExplorer.ProjectConfiguration.DefaultDisplayName">BING_linux</value>
+    <value type="QString" key="ProjectExplorer.ProjectConfiguration.DisplayName"></value>
+    <value type="QString" key="ProjectExplorer.ProjectConfiguration.Id">CMakeProjectManager.CMakeRunConfiguration.</value>
+    <value type="uint" key="RunConfiguration.QmlDebugServerPort">3768</value>
+    <value type="bool" key="RunConfiguration.UseCppDebugger">true</value>
+    <value type="bool" key="RunConfiguration.UseQmlDebugger">false</value>
+    <value type="bool" key="RunConfiguration.UseQmlDebuggerAuto">true</value>
+   </valuemap>
+   <value type="int" key="ProjectExplorer.Target.RunConfigurationCount">1</value>
+  </valuemap>
+ </data>
+ <data>
+  <variable>ProjectExplorer.Project.TargetCount</variable>
+  <value type="int">1</value>
+ </data>
+ <data>
+  <variable>ProjectExplorer.Project.Updater.EnvironmentId</variable>
+  <value type="QString">{1c480e06-4a57-40ca-8868-29ff19bb1281}</value>
+ </data>
+ <data>
+  <variable>ProjectExplorer.Project.Updater.FileVersion</variable>
+  <value type="int">11</value>
+ </data>
+</qtcreator>