Update curl to version 8.11.1

vendor/curl/include/curl/curlver.h

@@ -32,13 +32,13 @@
 
 /* This is the version number of the libcurl package from which this header
    file origins: */
-#define LIBCURL_VERSION "8.8.0"
+#define LIBCURL_VERSION "8.11.1"
 
 /* The numeric version number is also available "in parts" by using these
    defines: */
 #define LIBCURL_VERSION_MAJOR 8
-#define LIBCURL_VERSION_MINOR 8
-#define LIBCURL_VERSION_PATCH 0
+#define LIBCURL_VERSION_MINOR 11
+#define LIBCURL_VERSION_PATCH 1
 
 /* This is the numeric version of the libcurl version number, meant for easier
    parsing and comparisons by programs. The LIBCURL_VERSION_NUM define will
@@ -48,7 +48,7 @@
 
    Where XX, YY and ZZ are the main version, release and patch numbers in
    hexadecimal (using 8 bits each). All three numbers are always represented
-   using two digits.  1.2 would appear as "0x010200" while version 9.11.7
+   using two digits. 1.2 would appear as "0x010200" while version 9.11.7
    appears as "0x090b07".
 
    This 6-digit (24 bits) hexadecimal number does not show pre-release number,
@@ -59,7 +59,7 @@
    CURL_VERSION_BITS() macro since curl's own configure script greps for it
    and needs it to contain the full number.
 */
-#define LIBCURL_VERSION_NUM 0x080800
+#define LIBCURL_VERSION_NUM 0x080b01
 
 /*
  * This is the date and time when the full source package was created. The
@@ -70,7 +70,7 @@
  *
  * "2007-11-23"
  */
-#define LIBCURL_TIMESTAMP "2024-05-22"
+#define LIBCURL_TIMESTAMP "2024-12-11"
 
 #define CURL_VERSION_BITS(x,y,z) ((x)<<16|(y)<<8|(z))
 #define CURL_AT_LEAST_VERSION(x,y,z) \

vendor/curl/include/curl/easy.h

@@ -50,7 +50,7 @@ CURL_EXTERN void curl_easy_cleanup(CURL *curl);
  *
  * Request internal information from the curl session with this function.
  * The third argument MUST be pointing to the specific type of the used option
- * which is documented in each man page of the option. The data pointed to
+ * which is documented in each manpage of the option. The data pointed to
  * will be filled in accordingly and can be relied upon only if the function
  * returns CURLE_OK. This function is intended to get used *AFTER* a performed
  * transfer, all results from this function are undefined until the transfer

vendor/curl/include/curl/mprintf.h

@@ -32,19 +32,26 @@
 extern "C" {
 #endif
 
-#if (defined(__GNUC__) || defined(__clang__)) &&                        \
+#ifndef CURL_TEMP_PRINTF
+#if (defined(__GNUC__) || defined(__clang__) ||                         \
+  defined(__IAR_SYSTEMS_ICC__)) &&                                      \
   defined(__STDC_VERSION__) && (__STDC_VERSION__ >= 199901L) &&         \
   !defined(CURL_NO_FMT_CHECKS)
 #if defined(__MINGW32__) && !defined(__clang__)
+#if defined(__MINGW_PRINTF_FORMAT)  /* mingw-w64 3.0.0+. Needs stdio.h. */
 #define CURL_TEMP_PRINTF(fmt, arg) \
-  __attribute__((format(gnu_printf, fmt, arg)))
+  __attribute__((format(__MINGW_PRINTF_FORMAT, fmt, arg)))
+#else
+#define CURL_TEMP_PRINTF(fmt, arg)
+#endif
 #else
 #define CURL_TEMP_PRINTF(fmt, arg) \
   __attribute__((format(printf, fmt, arg)))
 #endif
 #else
 #define CURL_TEMP_PRINTF(fmt, arg)
 #endif
+#endif
 
 CURL_EXTERN int curl_mprintf(const char *format, ...)
   CURL_TEMP_PRINTF(1, 2);

vendor/curl/include/curl/multi.h

@@ -24,7 +24,7 @@
  *
  ***************************************************************************/
 /*
-  This is an "external" header file. Don't give away any internals here!
+  This is an "external" header file. Do not give away any internals here!
 
   GOALS
 
@@ -54,19 +54,15 @@
 extern "C" {
 #endif
 
-#if defined(BUILDING_LIBCURL) || defined(CURL_STRICTER)
-typedef struct Curl_multi CURLM;
-#else
 typedef void CURLM;
-#endif
 
 typedef enum {
   CURLM_CALL_MULTI_PERFORM = -1, /* please call curl_multi_perform() or
                                     curl_multi_socket*() soon */
   CURLM_OK,
   CURLM_BAD_HANDLE,      /* the passed-in handle is not a valid CURLM handle */
   CURLM_BAD_EASY_HANDLE, /* an easy handle was not good/valid */
-  CURLM_OUT_OF_MEMORY,   /* if you ever get this, you're in deep sh*t */
+  CURLM_OUT_OF_MEMORY,   /* if you ever get this, you are in deep sh*t */
   CURLM_INTERNAL_ERROR,  /* this is a libcurl bug */
   CURLM_BAD_SOCKET,      /* the passed in socket argument did not match */
   CURLM_UNKNOWN_OPTION,  /* curl_multi_setopt() with unsupported option */
@@ -109,7 +105,7 @@ struct CURLMsg {
 typedef struct CURLMsg CURLMsg;
 
 /* Based on poll(2) structure and values.
- * We don't use pollfd and POLL* constants explicitly
+ * We do not use pollfd and POLL* constants explicitly
  * to cover platforms without poll(). */
 #define CURL_WAIT_POLLIN    0x0001
 #define CURL_WAIT_POLLPRI   0x0002
@@ -205,7 +201,7 @@ CURL_EXTERN CURLMcode curl_multi_wakeup(CURLM *multi_handle);
  /*
   * Name:    curl_multi_perform()
   *
-  * Desc:    When the app thinks there's data available for curl it calls this
+  * Desc:    When the app thinks there is data available for curl it calls this
   *          function to read/write whatever there is right now. This returns
   *          as soon as the reads and writes are done. This function does not
   *          require that there actually is data available for reading or that
@@ -236,7 +232,7 @@ CURL_EXTERN CURLMcode curl_multi_cleanup(CURLM *multi_handle);
 /*
  * Name:    curl_multi_info_read()
  *
- * Desc:    Ask the multi handle if there's any messages/informationals from
+ * Desc:    Ask the multi handle if there is any messages/informationals from
  *          the individual transfers. Messages include informationals such as
  *          error code from the transfer or just the fact that a transfer is
  *          completed. More details on these should be written down as well.
@@ -248,13 +244,13 @@ CURL_EXTERN CURLMcode curl_multi_cleanup(CURLM *multi_handle);
  *          The data the returned pointer points to will not survive calling
  *          curl_multi_cleanup().
  *
- *          The 'CURLMsg' struct is meant to be very simple and only contain
- *          very basic information. If more involved information is wanted,
- *          we will provide the particular "transfer handle" in that struct
- *          and that should/could/would be used in subsequent
- *          curl_easy_getinfo() calls (or similar). The point being that we
- *          must never expose complex structs to applications, as then we'll
- *          undoubtably get backwards compatibility problems in the future.
+ *          The 'CURLMsg' struct is meant to be simple and only contain basic
+ *          information. If more involved information is wanted, we will
+ *          provide the particular "transfer handle" in that struct and that
+ *          should/could/would be used in subsequent curl_easy_getinfo() calls
+ *          (or similar). The point being that we must never expose complex
+ *          structs to applications, as then we will undoubtably get backwards
+ *          compatibility problems in the future.
  *
  * Returns: A pointer to a filled-in struct, or NULL if it failed or ran out
  *          of structs. It also writes the number of messages left in the
@@ -268,7 +264,7 @@ CURL_EXTERN CURLMsg *curl_multi_info_read(CURLM *multi_handle,
  * Name:    curl_multi_strerror()
  *
  * Desc:    The curl_multi_strerror function may be used to turn a CURLMcode
- *          value into the equivalent human readable error string.  This is
+ *          value into the equivalent human readable error string. This is
  *          useful for printing meaningful error messages.
  *
  * Returns: A pointer to a null-terminated error message.
@@ -282,7 +278,7 @@ CURL_EXTERN const char *curl_multi_strerror(CURLMcode);
  * Desc:    An alternative version of curl_multi_perform() that allows the
  *          application to pass in one of the file descriptors that have been
  *          detected to have "action" on them and let libcurl perform.
- *          See man page for details.
+ *          See manpage for details.
  */
 #define CURL_POLL_NONE   0
 #define CURL_POLL_IN     1

vendor/curl/include/curl/system.h

@@ -31,7 +31,7 @@
  * changed.
  *
  * In order to differentiate between platforms/compilers/architectures use
- * only compiler built in predefined preprocessor symbols.
+ * only compiler built-in predefined preprocessor symbols.
  *
  * curl_off_t
  * ----------
@@ -46,7 +46,7 @@
  * As a general rule, curl_off_t shall not be mapped to off_t. This rule shall
  * only be violated if off_t is the only 64-bit data type available and the
  * size of off_t is independent of large file support settings. Keep your
- * build on the safe side avoiding an off_t gating.  If you have a 64-bit
+ * build on the safe side avoiding an off_t gating. If you have a 64-bit
  * off_t then take for sure that another 64-bit data type exists, dig deeper
  * and you will find it.
  *
@@ -402,7 +402,7 @@
 #  define CURL_PULL_SYS_SOCKET_H     1
 
 #else
-/* generic "safe guess" on old 32 bit style */
+/* generic "safe guess" on old 32-bit style */
 # define CURL_TYPEOF_CURL_OFF_T     long
 # define CURL_FORMAT_CURL_OFF_T     "ld"
 # define CURL_FORMAT_CURL_OFF_TU    "lu"

vendor/curl/include/curl/typecheck-gcc.h

@@ -34,11 +34,11 @@
  * _curl_easy_setopt_err_sometype below
  *
  * NOTE: We use two nested 'if' statements here instead of the && operator, in
- *       order to work around gcc bug #32061.  It affects only gcc 4.3.x/4.4.x
+ *       order to work around gcc bug #32061. It affects only gcc 4.3.x/4.4.x
  *       when compiling with -Wlogical-op.
  *
- * To add an option that uses the same type as an existing option, you'll just
- * need to extend the appropriate _curl_*_option macro
+ * To add an option that uses the same type as an existing option, you will
+ * just need to extend the appropriate _curl_*_option macro
  */
 #define curl_easy_setopt(handle, option, value)                         \
   __extension__({                                                       \
@@ -245,7 +245,7 @@ CURLWARNING(_curl_easy_getinfo_err_curl_off_t,
 
 /* To add a new option to one of the groups, just add
  *   (option) == CURLOPT_SOMETHING
- * to the or-expression. If the option takes a long or curl_off_t, you don't
+ * to the or-expression. If the option takes a long or curl_off_t, you do not
  * have to do anything
  */
 
@@ -678,7 +678,7 @@ typedef CURLcode (*_curl_ssl_ctx_callback4)(CURL *, const void *,
                                             const void *);
 #ifdef HEADER_SSL_H
 /* hack: if we included OpenSSL's ssl.h, we know about SSL_CTX
- * this will of course break if we're included before OpenSSL headers...
+ * this will of course break if we are included before OpenSSL headers...
  */
 typedef CURLcode (*_curl_ssl_ctx_callback5)(CURL *, SSL_CTX *, void *);
 typedef CURLcode (*_curl_ssl_ctx_callback6)(CURL *, SSL_CTX *, const void *);

vendor/curl/include/curl/urlapi.h

@@ -97,11 +97,12 @@ typedef enum {
 #define CURLU_NO_AUTHORITY (1<<10)      /* Allow empty authority when the
                                            scheme is unknown. */
 #define CURLU_ALLOW_SPACE (1<<11)       /* Allow spaces in the URL */
-#define CURLU_PUNYCODE (1<<12)          /* get the host name in punycode */
+#define CURLU_PUNYCODE (1<<12)          /* get the hostname in punycode */
 #define CURLU_PUNY2IDN (1<<13)          /* punycode => IDN conversion */
 #define CURLU_GET_EMPTY (1<<14)         /* allow empty queries and fragments
                                            when extracting the URL or the
                                            components */
+#define CURLU_NO_GUESS_SCHEME (1<<15)   /* for get, do not accept a guess */
 
 typedef struct Curl_URL CURLU;
 
@@ -142,7 +143,7 @@ CURL_EXTERN CURLUcode curl_url_set(CURLU *handle, CURLUPart what,
 
 /*
  * curl_url_strerror() turns a CURLUcode value into the equivalent human
- * readable error string.  This is useful for printing meaningful error
+ * readable error string. This is useful for printing meaningful error
  * messages.
  */
 CURL_EXTERN const char *curl_url_strerror(CURLUcode);