1-Wire-NG Version 2.5.0

• Seperate OWFS2MQTT processes for each bus - especially on multi-bus Busmasters significantly speed up iButton scanning
• Bugfixes

1-Wire-NG Version 2.3.0

• Speed up present recognition on different busses - thanks to ToNKeY for donating test hardware!
• I2C Bus scan in WebUI available
• LoxBerry 3.0 compatibility
• Bugfixes when using GPIO Busmaster

1-Wire-NG Version 2.0

Bunch of Bugfixes Release :-)

• Also devices with Alphanumeric Family ID are recognized (Thanks to @leschNUX)
• Devices config is created automatically
• Uncached Reading is enabled as default now (needed for iButtons)
• GPIO 1 Wire: Enabled in /boot/config.txt automatically. Fixed to GPIO 4.
• Watchdog: After 10 failed attempts watchdog stops now.
• OWFS2MQTT: Logs also when an exceptions happend
• Restart services manually from WebUI is now possible
• Log entry if MQTT config is missing
• OWFS2MQTT: Rewritten to use getopt::long instead of CGI (doesn't work from other CGIs)
• Watchdog: Rewritten to use getopt::long instead of CGI (doesn't work from other CGIs)
• Devices: Convert commas to dot automatically (refresh time)
• Watchdog uses Locking file now to prevent starting it more than once
• Cron files survive plugin updates now; no "on the fly" generation anymore.
• Make apt non-interactive (again) during plugin installation
• OWFS2MQTT: Recognize iButtons safely and fast (thanks to @challo2018)
• OWFS2MQTT: Bus is set to -1 if iButton (or other sensor) isn't present and present detection is activated (thanks to @challo2018)
• Fixed issue with summed up busses during bus scan (list of busses increased and increased and increased...)
• Fix issue with broken Debian owfs package

1-Wire-NG Version 2.0

Bunch of Bugfixes Release :-)

• Also devices with Alphanumeric Family ID are recognized (Thanks to @leschNUX)
• Devices config is created automatically
• Uncached Reading is enabled as default now (needed for iButtons)
• GPIO 1 Wire: Enabled in /boot/config.txt automatically. Fixed to GPIO 4.
• Watchdog: After 10 failed attempts watchdog stops now.
• OWFS2MQTT: Logs also when an exceptions happend
• Restart services manually from WebUI is now possible
• Log entry if MQTT config is missing
• OWFS2MQTT: Rewritten to use getopt::long instead of CGI (doesn't work from other CGIs)
• Watchdog: Rewritten to use getopt::long instead of CGI (doesn't work from other CGIs)
• Devices: Convert commas to dot automatically (refresh time)
• Watchdog uses Locking file now to prevent starting it more than once
• Cron files survive plugin updates now; no "on the fly" generation anymore.
• Make apt non-interactive (again) during plugin installation
• OWFS2MQTT: Recognize iButtons safely and fast (thanks to @challo2018)
• OWFS2MQTT: Bus is set to -1 if iButton (or other sensor) isn't present and present detection is activated (thanks to @challo2018)
• OWFS2MQTT: Now only one process for all busses.
• OWFS2MQTT: Bugfix for "flipping" values if more than 1 bus is installed
• OWFS2MQTT: Loop time is now adjusted dynamically (euqal to lowest requested refresh time)
• Bugfix: Broken OWFS Button in WebUI if Loxberry runs not on Port 80

1-Wire-NG Version 2.0

Bunch of Bugfixes Release :-)

• Also devices with Alphanumeric Family ID are recognized (Thanks to @leschNUX)
• Devices config is created automatically
• Uncached Reading is enabled as default now (needed for iButtons)
• GPIO 1 Wire: Enabled in /boot/config.txt automatically. Fixed to GPIO 4.
• Watchdog: After 10 failed attempts watchdog stops now.
• OWFS2MQTT: Logs also when an exceptions happend
• Restart services manually from WebUI is now possible
• Log entry if MQTT config is missing
• OWFS2MQTT: Rewritten to use getopt::long instead of CGI (doesn't work from other CGIs)
• Watchdog: Rewritten to use getopt::long instead of CGI (doesn't work from other CGIs)
• Devices: Convert commas to dot automatically (refresh time)
• Watchdog uses Locking file now to prevent starting it more than once
• Cron files survive plugin updates now; no "on the fly" generation anymore.
• Make apt non-interactive (again) during plugin installation
• OWFS2MQTT: Recognize iButtons safely and fast (thanks to @challo2018)
• OWFS2MQTT: Bus is set to -1 if iButton (or other sensor) isn't present and present detection is activated (thanks to @challo2018)

1-Wire-NG Version 2.0

Bunch of Bugfixes Release :-)

• Also devices with Alphanumeric Family ID are recognized (Thanks to @leschNUX)
• Devices config is created automatically
• Uncached Reading is enabled as default now (needed for iButtons)
• GPIO 1 Wire: Enabled in /boot/config.txt automatically. Fixed to GPIO 4.
• Watchdog: After 10 failed attempts watchdog stops now.
• OWFS2MQTT: Logs also when an exceptions happend
• Restart services manually from WebUI is now possible
• Log entry if MQTT config is missing
• OWFS2MQTT: Rewritten to use getopt::long instead of CGI (doesn't work from other CGIs)
• Watchdog: Rewritten to use getopt::long instead of CGI (doesn't work from other CGIs)
• Devices: Convert commas to dot automatically (refresh time)
• Watchdog uses Locking file now to prevent starting it more than once
• Cron files survive plugin updates now; no "on the fly" generation anymore.
• Make apt non-interactive (again) during plugin installation

1-Wire-NG Version 2.0

Bunch of Bugfixes Release :-)

• Also devices with Alphanumeric Family ID are recognized (Thanks to @leschNUX)
• Devices config is created automatically
• Uncached Reading is enabled as default now (needed for iButtons)
• GPIO 1 Wire: Enabled in /boot/config.txt automatically. Fixed to GPIO 4.
• Watchdog: After 10 failed attempts watchdog stops now.
• OWFS2MQTT: Logs also when an exceptions happend
• Restart services manually from WebUI is now possible
• Log entry if MQTT config is missing
• OWFS2MQTT: Rewritten to use getopt::long instead of CGI (doesn't work from other CGIs)
• Watchdog: Rewritten to use getopt::long instead of CGI (doesn't work from other CGIs)
• Devices: Convert commas to dot automatically (refresh time)
• Watchdog uses Locking file now to prevent starting it more than once
• Cron files survive plugin updates now; no "on the fly" generation anymore.
• Make apt non-interactive (again) during plugin installation

1-Wire-NG Version 2.0

Bunch of Bugfixes Release :-)

• Also devices with Alphanumeric Family ID are recognized (Thanks to @leschNUX)
• Devices config is created automatically
• Uncached Reading is enabled as default now (needed for iButtons)
• GPIO 1 Wire: Enabled in /boot/config.txt automatically. Fixed to GPIO 4.
• Watchdog: After 10 failed attempts watchdog stops now.
• OWFS2MQTT: Logs also when an exceptions happend
• Restart services manually from WebUI is now possible
• Log entry if MQTT config is missing
• OWFS2MQTT: Rewritten to use getopt::long instead of CGI (doesn't work from other CGIs)
• Watchdog: Rewritten to use getopt::long instead of CGI (doesn't work from other CGIs)
• Devices: Convert commas to dot automatically (refresh time)
• Watchdog uses Locking file now to prevent starting it more than once

1-Wire-NG Version 1.0.1

• Fixed some smaller Bugs in the WebUI
• Fixed a bug with apt during upgrade (New Config file question)
• Config files are saved when upgrading the plugin
• German translation

1-Wire-NG Version 1.0.0

• Fixed some smaller Bugs in the WebUI
• Fixed a bug with apt during upgrade (New Config file question)
• Config files are saved when upgrading the plugin