This is a simple implementation of a SurePet Feeder to MQTT broker.
Thank you to Peter Lambrechtsen for reversing the MQTT protocol used by the SurePet system and finding the xor encryption key.
This is the list of features currently implemented:
- Reporting when the lid is open or closed by pet
- Reporting when the lid is open or closed by user
- Reporting the amount of food left in the left,right and both trays
- Reporting the Pet Chip ID that is feeding
These values can be consumed by Home Assistant to generate graphs and gauges:
This requires the following:
- A Raspberry Pi (Tested on Pi3)
- Mikroe Pi3 Shield - https://www.mikroe.com/pi-3-click-shield
- BeeClick - https://www.mikroe.com/bee-click
The following additional packages need to be installed onto the Pi:
- libmosquitto-dev
- libmosquitto1
- wiringpi
- libcjson-dev
Then the SPI needs to be enabled using the raspi-config command.
- Type
sudo raspi-config - Select "Interface Options"
- Select "SPI"
- Select "Yes" to enable SPI
By default, the application stores persistent state data into /var/lib/catfeeder/state.json. This means that the /var/lib/catfeeder directory needs to be created and writable by the application.
To start, type:
./CatFeeder -h <broker> -p <port>
Once the application is running, press the "connect" button on the Feeder, this will pair the feeder with the application.
The application can be added to supervisord (http://supervisord.org/) to allow it to be run in the background.
| Topic Name | Type | Description |
|---|---|---|
| petfeeder/[deviceMAC]/message | String | The raw MiWi payload, Only sent in debug mode |
| petfeeder/[deviceMAC]/battery | Integer | Guess at what could be battery level |
| petfeeder/[deviceMAC]/lidOpen | Boolean | true if the lid is open |
| petfeeder/[deviceMAC]/userOpen | Boolean | true if the user opened the lid |
| petfeeder/[deviceMAC]/leftOpen_weight | Float | Weight of food in the left tray in grams on opening |
| petfeeder/[deviceMAC]/leftClose_weight | Float | Weight of food in the left tray in grams on closing |
| petfeeder/[deviceMAC]/rightOpen_weight | Float | Weight of food in the right tray in grams on opening |
| petfeeder/[deviceMAC]/rightClose_weight | Float | Weight of food in the right tray in grams on closing |
| petfeeder/[deviceMAC]/weight | Float | Total Weight of food in both trays on closing |
| pet/[petChipID]/petFeeding | Boolean | true if the pet opened the lid |
| pet/[petChipID]/petFeedingTime | Integer | The amount of time (in seconds) the pet was feeding for in this session |
| pet/[petChipID]/eaten | Float | The amount of food eaten in by this pet in this session |
| pet/[petChipID]/petTotalDailyEaten | Float | The total daily amount of food (in grams) the pet has eaten, reset at midnight |
| pet/[petChipID]/petTotalDailyFeedingTime | Integer | The total daily amount of time (in seconds) the pet was feeding, reset at midnight |
- deviceMAC: The MAC address of the device
- petChipID: The Pets Chip ID
The SurePet feeder protocol is based on MiWi, this is a protocol made by Microchip. SurePet have changed a few MiWi fields to make it incompatible, for example the Protocol ID has been changed from 0x4D to 0x7E.
- More daily stats
- Handle multiple feeders/doors
- Battery state, could be byte 3 in the beacon