*sync with Marlin repo

moonglow · Aug 5, 2021 · d26a00b · d26a00b
1 parent 57e8487
commit d26a00b
Show file tree

Hide file tree

Showing 328 changed files with 9,094 additions and 5,258 deletions.
diff --git a/Marlin/.github/ISSUE_TEMPLATE/bug_report.yml b/Marlin/.github/ISSUE_TEMPLATE/bug_report.yml
@@ -110,6 +110,18 @@ body:
       label: Add-ons
       description: Please list any hardware add-ons that could be involved.
 
+  - type: dropdown
+    attributes:
+      label: Bed Leveling
+      description: What kind of bed leveling compensation are you using?
+      options:
+        - UBL Bilinear mesh
+        - ABL Bilinear mesh
+        - ABL Linear grid
+        - ABL 3-point
+        - MBL Manual Bed Leveling
+        - No Bed Leveling
+
   - type: dropdown
     attributes:
       label: Your Slicer

diff --git a/Marlin/.github/workflows/bump-date.yml b/Marlin/.github/workflows/bump-date.yml
@@ -28,6 +28,7 @@ jobs:
         # Inline Bump Script
         DIST=$( date +"%Y-%m-%d" )
         eval "sed -E -i 's/(#define +STRING_DISTRIBUTION_DATE) .*$/\1 \"$DIST\"/g' Marlin/src/inc/Version.h" && \
+        eval "sed -E -i 's/(#define +STRING_DISTRIBUTION_DATE) .*$/\1 \"$DIST\"/g' Marlin/Version.h" && \
         git config user.name "${GITHUB_ACTOR}" && \
         git config user.email "${GITHUB_ACTOR}@users.noreply.github.com" && \
         git add . && \

diff --git a/Marlin/Marlin/Configuration.h b/Marlin/Marlin/Configuration.h
@@ -426,70 +426,92 @@
 // @section temperature
 
 /**
- * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
+ * --NORMAL IS 4.7kΩ PULLUP!-- 1kΩ pullup can be used on hotend sensor, using correct resistor and table
  *
  * Temperature sensors available:
  *
- *    -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
- *    -3 : thermocouple with MAX31855 (only for sensors 0-1)
- *    -2 : thermocouple with MAX6675 (only for sensors 0-1)
- *    -4 : thermocouple with AD8495
- *    -1 : thermocouple with AD595
+ *  SPI RTD/Thermocouple Boards - IMPORTANT: Read the NOTE below!
+ *  -------
+ *    -5 : MAX31865 with Pt100/Pt1000, 2, 3, or 4-wire  (only for sensors 0-1)
+ *                  NOTE: You must uncomment/set the MAX31865_*_OHMS_n defines below.
+ *    -3 : MAX31855 with Thermocouple, -200°C to +700°C (only for sensors 0-1)
+ *    -2 : MAX6675  with Thermocouple, 0°C to +700°C    (only for sensors 0-1)
+ *
+ *  NOTE: Ensure TEMP_n_CS_PIN is set in your pins file for each TEMP_SENSOR_n using an SPI Thermocouple. By default,
+ *        Hardware SPI on the default serial bus is used. If you have also set TEMP_n_SCK_PIN and TEMP_n_MISO_PIN,
+ *        Software SPI will be used on those ports instead. You can force Hardware SPI on the default bus in the
+ *        Configuration_adv.h file. At this time, separate Hardware SPI buses for sensors are not supported.
+ *
+ *  Analog Themocouple Boards
+ *  -------
+ *    -4 : AD8495 with Thermocouple
+ *    -1 : AD595  with Thermocouple
+ *
+ *  Analog Thermistors - 4.7kΩ pullup - Normal
+ *  -------
+ *     1 : 100kΩ  EPCOS - Best choice for EPCOS thermistors
+ *   331 : 100kΩ  Same as #1, but 3.3V scaled for MEGA
+ *   332 : 100kΩ  Same as #1, but 3.3V scaled for DUE
+ *     2 : 200kΩ  ATC Semitec 204GT-2
+ *   202 : 200kΩ  Copymaster 3D
+ *     3 : ???Ω   Mendel-parts thermistor
+ *     4 : 10kΩ   Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!
+ *     5 : 100kΩ  ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
+ *   501 : 100kΩ  Zonestar - Tronxy X3A
+ *   502 : 100kΩ  Zonestar - used by hot bed in Zonestar Průša P802M
+ *   512 : 100kΩ  RPW-Ultra hotend
+ *     6 : 100kΩ  EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
+ *     7 : 100kΩ  Honeywell 135-104LAG-J01
+ *    71 : 100kΩ  Honeywell 135-104LAF-J01
+ *     8 : 100kΩ  Vishay 0603 SMD NTCS0603E3104FXT
+ *     9 : 100kΩ  GE Sensing AL03006-58.2K-97-G1
+ *    10 : 100kΩ  RS PRO 198-961
+ *    11 : 100kΩ  Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%
+ *    12 : 100kΩ  Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed
+ *    13 : 100kΩ  Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%
+ *    15 : 100kΩ  Calibrated for JGAurora A5 hotend
+ *    18 : 200kΩ  ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327
+ *    22 : 100kΩ  GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input
+ *    23 : 100kΩ  GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input
+ *    30 : 100kΩ  Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
+ *    60 : 100kΩ  Maker's Tool Works Kapton Bed Thermistor - beta 3950
+ *    61 : 100kΩ  Formbot/Vivedino 350°C Thermistor - beta 3950
+ *    66 : 4.7MΩ  Dyze Design High Temperature Thermistor
+ *    67 : 500kΩ  SliceEngineering 450°C Thermistor
+ *    70 : 100kΩ  bq Hephestos 2
+ *    75 : 100kΩ  Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
+ *
+ *  Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ.
+ *  -------                           (but gives greater accuracy and more stable PID)
+ *    51 : 100kΩ  EPCOS (1kΩ pullup)
+ *    52 : 200kΩ  ATC Semitec 204GT-2 (1kΩ pullup)
+ *    55 : 100kΩ  ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)
+ *
+ *  Analog Thermistors - 10kΩ pullup - Atypical
+ *  -------
+ *    99 : 100kΩ  Found on some Wanhao i3 machines with a 10kΩ pull-up resistor
+ *
+ *  Analog RTDs (Pt100/Pt1000)
+ *  -------
+ *   110 : Pt100  with 1kΩ pullup (atypical)
+ *   147 : Pt100  with 4.7kΩ pullup
+ *  1010 : Pt1000 with 1kΩ pullup (atypical)
+ *  1047 : Pt1000 with 4.7kΩ pullup (E3D)
+ *    20 : Pt100  with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
+ *                NOTE: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
+ *    21 : Pt100  with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
+ *                NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
+ *   201 : Pt100  with circuit in Overlord, similar to Ultimainboard V2.x
+ *
+ *  Custom/Dummy/Other Thermos
+ *  ------
  *     0 : not used
- *     1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
- *   331 : (3.3V scaled thermistor 1 table for MEGA)
- *   332 : (3.3V scaled thermistor 1 table for DUE)
- *     2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
- *   202 : 200k thermistor - Copymaster 3D
- *     3 : Mendel-parts thermistor (4.7k pullup)
- *     4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
- *     5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
- *   501 : 100K Zonestar (Tronxy X3A) Thermistor
- *   502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
- *   512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
- *     6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
- *     7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
- *    71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
- *     8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
- *     9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
- *    10 : 100k RS thermistor 198-961 (4.7k pullup)
- *    11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
- *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
- *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
- *    15 : 100k thermistor calibration for JGAurora A5 hotend
- *    18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
- *    20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
- *         NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
- *    21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
- *         NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
- *    22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
- *    23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
- *    30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
- *   201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
- *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
- *    61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
- *    66 : 4.7M High Temperature thermistor from Dyze Design
- *    67 : 450C thermistor from SliceEngineering
- *    70 : the 100K thermistor found in the bq Hephestos 2
- *    75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
- *    99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
- *
- *       1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
- *                              (but gives greater accuracy and more stable PID)
- *    51 : 100k thermistor - EPCOS (1k pullup)
- *    52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
- *    55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
- *
- *  1047 : Pt1000 with 4k7 pullup (E3D)
- *  1010 : Pt1000 with 1k pullup (non standard)
- *   147 : Pt100 with 4k7 pullup
- *   110 : Pt100 with 1k pullup (non standard)
- *
  *  1000 : Custom - Specify parameters in Configuration_adv.h
  *
- *         Use these for Testing or Development purposes. NEVER for production machine.
+ *   !!! Use these for Testing or Development purposes. NEVER for production machine. !!!
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
+ *
  */
 #define TEMP_SENSOR_0         -666
 #if EXTRUDERS > 1
@@ -521,7 +543,7 @@
 
 // Resistor values when using MAX31865 sensors (-5) on TEMP_SENSOR_0 / 1
 //#define MAX31865_SENSOR_OHMS_0      100   // (Ω) Typically 100 or 1000 (PT100 or PT1000)
-//#define MAX31865_CALIBRATION_OHMS_0 430   // (Ω) Typically 430 for AdaFruit PT100; 4300 for AdaFruit PT1000
+//#define MAX31865_CALIBRATION_OHMS_0 430   // (Ω) Typically 430 for Adafruit PT100; 4300 for Adafruit PT1000
 //#define MAX31865_SENSOR_OHMS_1      100
 //#define MAX31865_CALIBRATION_OHMS_1 430
 
@@ -1035,7 +1057,9 @@
  *
  * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
  */
+#if DISABLED(LIN_ADVANCE)
 #define S_CURVE_ACCELERATION
+#endif
 
 //===========================================================================
 //============================= Z Probe Options =============================
@@ -1493,13 +1517,15 @@
  * RAMPS-based boards use SERVO3_PIN for the first runout sensor.
  * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc.
  */
-//#define FILAMENT_RUNOUT_SENSOR
+#if DISABLED( USE_MKS_UI )
+#define FILAMENT_RUNOUT_SENSOR
+#endif
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500.
+  #define FIL_RUNOUT_ENABLED_DEFAULT false // Enable the sensor on startup. Override with M412 followed by M500.
   #define NUM_RUNOUT_SENSORS   1          // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
 
-  #define FIL_RUNOUT_STATE     LOW        // Pin state indicating that filament is NOT present.
-  #define FIL_RUNOUT_PULLUP               // Use internal pullup for filament runout pins.
+  #define FIL_RUNOUT_STATE     HIGH        // Pin state indicating that filament is NOT present.
+  //#define FIL_RUNOUT_PULLUP             // Use internal pullup for filament runout pins.
   //#define FIL_RUNOUT_PULLDOWN           // Use internal pulldown for filament runout pins.
   //#define WATCH_ALL_RUNOUT_SENSORS      // Execute runout script on any triggering sensor, not only for the active extruder.
                                           // This is automatically enabled for MIXING_EXTRUDERs.
@@ -1793,15 +1819,13 @@
 //#define MANUAL_J_HOME_POS 0
 //#define MANUAL_K_HOME_POS 0
 
-// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
-//
-// With this feature enabled:
-//
-// - Allow Z homing only after X and Y homing AND stepper drivers still enabled.
-// - If stepper drivers time out, it will need X and Y homing again before Z homing.
-// - Move the Z probe (or nozzle) to a defined XY point before Z Homing.
-// - Prevent Z homing when the Z probe is outside bed area.
-//
+/**
+ * Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
+ *
+ * - Moves the Z probe (or nozzle) to a defined XY point before Z homing.
+ * - Allows Z homing only when XY positions are known and trusted.
+ * - If stepper drivers sleep, XY homing may be required again before Z homing.
+ */
 //#define Z_SAFE_HOMING
 
 #if ENABLED(Z_SAFE_HOMING)
@@ -2121,11 +2145,7 @@
  *
  * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'hu':'Hungarian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ro':'Romanian', 'ru':'Russian', 'sk':'Slovak', 'sv':'Swedish', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)' }
  */
-#if ENABLED( USE_OLD_MARLIN_UI )
-#define LCD_LANGUAGE ru
-#else
 #define LCD_LANGUAGE en
-#endif
 
 /**
  * LCD Character Set
@@ -2491,6 +2511,11 @@
 //
 //#define MKS_MINI_12864
 
+//
+// MKS MINI12864 V3 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight.
+//
+//#define MKS_MINI_12864_V3
+
 //
 // MKS LCD12864A/B with graphic controller and SD support. Follows MKS_MINI_12864 pinout.
 // https://www.aliexpress.com/item/33018110072.html
@@ -2697,6 +2722,8 @@
 /* from FF firmware: ILI9488, OTM4802 */
 #define DELAYED_BACKLIGHT_INIT
 #define USE_FLASHFORGE_TFT
+/* allow FF bootloader to load TFT config */
+//#define USE_FLASHFORGE_BOOTLOADER_TFT
 #define TFT_DRIVER                AUTO
 
 //

diff --git a/Marlin/Marlin/Configuration_adv.h b/Marlin/Marlin/Configuration_adv.h
@@ -131,10 +131,21 @@
   #define REDUNDANT_BETA                   3950    // Beta value
 #endif
 
-//
-// Hephestos 2 24V heated bed upgrade kit.
-// https://store.bq.com/en/heated-bed-kit-hephestos2
-//
+/**
+ * Configuration options for MAX Thermocouples (-2, -3, -5).
+ *   FORCE_HW_SPI:   Ignore SCK/MOSI/MISO pins and just use the CS pin & default SPI bus.
+ *   MAX31865_WIRES: Set the number of wires for the probe connected to a MAX31865 board, 2-4. Default: 2
+ *   MAX31865_50HZ:  Enable 50Hz filter instead of the default 60Hz.
+ */
+//#define TEMP_SENSOR_FORCE_HW_SPI
+//#define MAX31865_SENSOR_WIRES_0 2
+//#define MAX31865_SENSOR_WIRES_1 2
+//#define MAX31865_50HZ_FILTER
+
+/**
+ * Hephestos 2 24V heated bed upgrade kit.
+ * https://store.bq.com/en/heated-bed-kit-hephestos2
+ */
 //#define HEPHESTOS2_HEATED_BED_KIT
 #if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
   #undef TEMP_SENSOR_BED
@@ -1883,7 +1894,7 @@
   //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants
   #define LIN_ADVANCE_K         0.00   // Unit: mm compression per 1mm/s extruder speed
   //#define LA_DEBUG            // If enabled, this will generate debug information output over USB.
-  #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
+  //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
 #endif
 
 // @section leveling

diff --git a/Marlin/Marlin/src/HAL/AVR/u8g_com_HAL_AVR_sw_spi.cpp b/Marlin/Marlin/src/HAL/AVR/u8g_com_HAL_AVR_sw_spi.cpp
@@ -62,7 +62,7 @@
 #include "../shared/Marduino.h"
 #include "../shared/Delay.h"
 
-#include <U8glib.h>
+#include <U8glib-HAL.h>
 
 uint8_t u8g_bitData, u8g_bitNotData, u8g_bitClock, u8g_bitNotClock;
 volatile uint8_t *u8g_outData, *u8g_outClock;

diff --git a/Marlin/Marlin/src/HAL/DUE/HAL_SPI.cpp b/Marlin/Marlin/src/HAL/DUE/HAL_SPI.cpp
@@ -240,7 +240,7 @@
   }
 
   // all the others
-  static uint32_t spiDelayCyclesX4 = 4 * (F_CPU) / 1000000; // 4µs => 125khz
+  static uint16_t spiDelayNS = 4000; // 4000ns => 125khz
 
   static uint8_t spiTransferX(uint8_t b) { // using Mode 0
     int bits = 8;
@@ -249,12 +249,12 @@
       b <<= 1; // little setup time
 
       WRITE(SD_SCK_PIN, HIGH);
-      DELAY_CYCLES(spiDelayCyclesX4);
+      DELAY_NS(spiDelayNS);
 
       b |= (READ(SD_MISO_PIN) != 0);
 
       WRITE(SD_SCK_PIN, LOW);
-      DELAY_CYCLES(spiDelayCyclesX4);
+      DELAY_NS(spiDelayNS);
     } while (--bits);
     return b;
   }
@@ -510,7 +510,7 @@
         spiRxBlock = (pfnSpiRxBlock)spiRxBlockX;
         break;
       default:
-        spiDelayCyclesX4 = ((F_CPU) / 1000000) >> (6 - spiRate) << 2; // spiRate of 2 gives the maximum error with current CPU
+        spiDelayNS = 4000 >> (6 - spiRate); // spiRate of 2 gives the maximum error with current CPU
         spiTransferTx = (pfnSpiTransfer)spiTransferX;
         spiTransferRx = (pfnSpiTransfer)spiTransferX;
         spiTxBlock = (pfnSpiTxBlock)spiTxBlockX;

diff --git a/Marlin/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp b/Marlin/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp
@@ -60,7 +60,7 @@
 
 #if HAS_MARLINUI_U8GLIB
 
-#include <U8glib.h>
+#include <U8glib-HAL.h>
 
 #include "../../../MarlinCore.h"
 

diff --git a/Marlin/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_st7920_sw_spi.cpp b/Marlin/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_st7920_sw_spi.cpp
@@ -62,7 +62,7 @@
 #include "../../../inc/MarlinConfig.h"
 #include "../../shared/Delay.h"
 
-#include <U8glib.h>
+#include <U8glib-HAL.h>
 
 #include "u8g_com_HAL_DUE_sw_spi_shared.h"
 

diff --git a/Marlin/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi.cpp b/Marlin/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi.cpp
@@ -64,7 +64,7 @@
 #include "../../shared/Marduino.h"
 #include "../../shared/Delay.h"
 
-#include <U8glib.h>
+#include <U8glib-HAL.h>
 
 #if ENABLED(FYSETC_MINI_12864)
   #define SPISEND_SW_DUE u8g_spiSend_sw_DUE_mode_3

diff --git a/Marlin/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.cpp b/Marlin/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.cpp
@@ -62,7 +62,7 @@
 #include "../../../inc/MarlinConfig.h"
 #include "../../shared/Delay.h"
 
-#include <U8glib.h>
+#include <U8glib-HAL.h>
 
 #include "u8g_com_HAL_DUE_sw_spi_shared.h"
 

diff --git a/Marlin/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.h b/Marlin/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.h
@@ -23,7 +23,7 @@
 
 #include "../../../inc/MarlinConfigPre.h"
 #include "../../shared/Marduino.h"
-#include <U8glib.h>
+#include <U8glib-HAL.h>
 
 void u8g_SetPIOutput_DUE(u8g_t *u8g, uint8_t pin_index);
 void u8g_SetPILevel_DUE(u8g_t *u8g, uint8_t pin_index, uint8_t level);