Add distance to surface tests

tests/CMakeLists.txt

@@ -9,6 +9,7 @@ get_target_property(PYTHONPATH python-virtualenv PYTHONPATH)
 
 add_subdirectory(basics)
 add_subdirectory(confinement)
+add_subdirectory(distances)
 add_subdirectory(germanium)
 add_subdirectory(internals)
 add_subdirectory(output)

tests/distances/CMakeLists.txt

@@ -0,0 +1,28 @@
+# collect auxiliary files
+file(
+  GLOB _aux
+  RELATIVE ${PROJECT_SOURCE_DIR}
+  macros/*.mac macros/*.json gdml/*.gdml gdml/*.xml *.py)
+
+# copy them to the build area
+
+foreach(_file ${_aux})
+  configure_file(${PROJECT_SOURCE_DIR}/${_file} ${PROJECT_BINARY_DIR}/${_file} COPYONLY)
+endforeach()
+
+# generate the GDML file
+add_test(NAME distances-ge/gen-gdml COMMAND ${PYTHONPATH} make_ge_gdml.py)
+set_tests_properties(distances-ge/gen-gdml PROPERTIES LABELS extra FIXTURES_SETUP
+                                                      distance-gdml-fixture)
+
+# test on HPGe containment
+add_test(NAME distances-ge/gen-output COMMAND ${REMAGE_PYEXE} -g gdml/ge-array.gdml -w -o
+                                              test-distance.lh5 -- macros/test-ge-distance.mac)
+set_tests_properties(
+  distances-ge/gen-output PROPERTIES LABELS extra FIXTURES_SETUP distance-output-fixture
+                                     FIXTURES_REQUIRED distance-gdml-fixture)
+
+add_test(NAME distances-ge/distance COMMAND ${PYTHONPATH} ./test_ge_distance.py)
+
+set_tests_properties(distances-ge/distance PROPERTIES LABELS extra FIXTURES_REQUIRED
+                                                      distance-output-fixture)

tests/distances/macros/B99000A.json

@@ -0,0 +1,36 @@
+{
+  "name": "B99000A",
+  "type": "bege",
+  "production": {
+    "manufacturer": "Test",
+    "enrichment": {
+      "val": 0.75,
+      "unc": 0.05
+    }
+  },
+  "geometry": {
+    "height_in_mm": 40.0,
+    "radius_in_mm": 35.0,
+    "groove": {
+      "depth_in_mm": 2.0,
+      "radius_in_mm": {
+        "outer": 12.0,
+        "inner": 10.0
+      }
+    },
+    "pp_contact": {
+      "radius_in_mm": 7.5,
+      "depth_in_mm": 0
+    },
+    "taper": {
+      "top": {
+        "angle_in_deg": 0.0,
+        "height_in_mm": 0.0
+      },
+      "bottom": {
+        "angle_in_deg": 0.0,
+        "height_in_mm": 0.0
+      }
+    }
+  }
+}

tests/distances/macros/C99000A.json

@@ -0,0 +1,44 @@
+{
+  "name": "C99000A",
+  "type": "coax",
+  "production": {
+    "manufacturer": "Test",
+    "enrichment": {
+      "val": 0.75,
+      "unc": 0.05
+    }
+  },
+  "geometry": {
+    "height_in_mm": 80,
+    "radius_in_mm": 40,
+    "borehole": {
+      "radius_in_mm": 7,
+      "depth_in_mm": 70
+    },
+    "groove": {
+      "depth_in_mm": 2,
+      "radius_in_mm": {
+        "outer": 20,
+        "inner": 17
+      }
+    },
+    "pp_contact": {
+      "radius_in_mm": 17,
+      "depth_in_mm": 0
+    },
+    "taper": {
+      "top": {
+        "angle_in_deg": 45,
+        "height_in_mm": 5
+      },
+      "bottom": {
+        "angle_in_deg": 45,
+        "height_in_mm": 2
+      },
+      "borehole": {
+        "angle_in_deg": 0,
+        "height_in_mm": 0
+      }
+    }
+  }
+}

tests/distances/macros/P99000A.json

@@ -0,0 +1,29 @@
+{
+  "name": "P99000A",
+  "type": "ppc",
+  "production": {
+    "manufacturer": "Test",
+    "enrichment": {
+      "val": 0.75,
+      "unc": 0.05
+    }
+  },
+  "geometry": {
+    "height_in_mm": 45.0,
+    "radius_in_mm": 35.0,
+    "pp_contact": {
+      "radius_in_mm": 2,
+      "depth_in_mm": 2
+    },
+    "taper": {
+      "top": {
+        "angle_in_deg": 0,
+        "height_in_mm": 0
+      },
+      "bottom": {
+        "angle_in_deg": 30,
+        "height_in_mm": 10
+      }
+    }
+  }
+}

tests/distances/macros/V99000A.json

@@ -0,0 +1,44 @@
+{
+  "name": "V99000A",
+  "type": "icpc",
+  "production": {
+    "manufacturer": "Test",
+    "enrichment": {
+      "val": 0.75,
+      "unc": 0.05
+    }
+  },
+  "geometry": {
+    "height_in_mm": 70,
+    "radius_in_mm": 35,
+    "borehole": {
+      "radius_in_mm": 5,
+      "depth_in_mm": 55
+    },
+    "groove": {
+      "depth_in_mm": 1,
+      "radius_in_mm": {
+        "outer": 10,
+        "inner": 9
+      }
+    },
+    "pp_contact": {
+      "radius_in_mm": 3,
+      "depth_in_mm": 2
+    },
+    "taper": {
+      "top": {
+        "angle_in_deg": 10,
+        "height_in_mm": 10
+      },
+      "bottom": {
+        "angle_in_deg": 0,
+        "height_in_mm": 0
+      },
+      "borehole": {
+        "angle_in_deg": 0,
+        "height_in_mm": 0
+      }
+    }
+  }
+}

tests/distances/macros/test-ge-distance.mac

@@ -0,0 +1,17 @@
+/control/execute macros/detectors-fake.mac
+/RMG/Output/NtuplePerDetector false
+
+/run/initialize
+
+/RMG/Generator/Confine Volume
+/RMG/Generator/Confinement/Physical/AddVolume B.*
+/RMG/Generator/Confinement/Physical/AddVolume C.*
+/RMG/Generator/Confinement/Physical/AddVolume P.*
+/RMG/Generator/Confinement/Physical/AddVolume V.*
+
+
+/RMG/Generator/Select GPS
+/gps/particle e-
+/gps/energy 1 eV
+
+/run/beamOn 100000

tests/distances/make_ge_gdml.py

@@ -0,0 +1,62 @@
+from __future__ import annotations
+
+import json
+from pathlib import Path
+
+import numpy as np
+import pyg4ometry as pg4
+import pygeomtools as pytools
+from legendhpges import make_hpge
+
+# read the configs
+out_gdml = "gdml/ge-array.gdml"
+det_macro = "macros/detectors-fake.mac"
+config_dict = {}
+for det_type in ["B", "P", "V", "C"]:
+    with Path.open(Path(f"macros/{det_type}99000A.json")) as file:
+        config_dict[det_type] = json.load(file)
+
+
+def add_hpge(lar, reg, angle, radius, z, idx, dtype):
+    x = radius * np.sin(np.deg2rad(angle))
+    y = radius * np.cos(np.deg2rad(angle))
+    logical_detector = make_hpge(config_dict[dtype], name=f"{dtype}{idx}", registry=reg)
+    logical_detector.pygeom_color_rgba = (0, 1, 1, 0.2)
+    physical_detector = pg4.geant4.PhysicalVolume(
+        [0, 0, 0], [x, y, z], logical_detector, f"{dtype}{idx}", lar, reg
+    )
+
+    physical_detector.pygeom_active_dector = pytools.RemageDetectorInfo(
+        "germanium",
+        idx,
+        config_dict[dtype],
+    )
+    return idx + 1
+
+
+# construct geometry
+reg = pg4.geant4.Registry()
+ws = pg4.geant4.solid.Box("ws", 300, 300, 300, reg, lunit="mm")
+wl = pg4.geant4.LogicalVolume(ws, "G4_Galactic", "wl", reg)
+wl.pygeom_color_rgba = (0.1, 1, 0.1, 0.5)
+
+reg.setWorld(wl)
+
+
+# hpge strings
+string_radius = 85
+string_angles = [0, 90, 180, 270]
+
+n = 0
+for i, det in enumerate(["V", "P", "B", "C"]):
+    angle = string_angles[i]
+    n = add_hpge(wl, reg, angle, string_radius, -20, n, det)
+
+pytools.detectors.write_detector_auxvals(reg)
+pytools.geometry.check_registry_sanity(reg, reg)
+
+
+w = pg4.gdml.Writer()
+w.addDetector(reg)
+w.write(out_gdml)
+pytools.detectors.generate_detector_macro(reg, det_macro)