docs: Test cases for core and PQM.

docs/plugins/index.rst

@@ -45,10 +45,10 @@ Application Specific plugins
     * :ref:`Faults <faults>`
 
 * PQM
-    * :ref:`RMS <rms>`
-    * :ref:`Harmonics <harmonics>`
-    * :ref:`Waveform <waveform>`
-    * :ref:`Settings <settings>`
+    * :ref:`RMS <pqm-rms>`
+    * :ref:`Harmonics <pqm-harmonics>`
+    * :ref:`Waveform <pqm-waveform>`
+    * :ref:`Settings <pqm-settings>`
 
 
 Each plugin:

docs/plugins/pqm/harmonics.rst

@@ -1,4 +1,4 @@
-.. _harmonics:
+.. _pqm-harmonics:
 
 Harmonics
 ================================================================================

docs/plugins/pqm/rms.rst

@@ -1,4 +1,4 @@
-.. _rms:
+.. _pqm-rms:
 
 RMS  
 ================================================================================

docs/plugins/pqm/settings.rst

@@ -1,4 +1,4 @@
-.. _settings:
+.. _pqm-settings:
 
 System settings
 ================================================================================

docs/plugins/pqm/waveform.rst

@@ -1,4 +1,4 @@
-.. _waveform:
+.. _pqm-waveform:
 
 Waveform
 ================================================================================

docs/tests/general/core/add_dev_tests.rst

@@ -0,0 +1,275 @@
+.. _add_dev_tests:
+
+**Add device**
+==============
+
+.. note::
+
+    User guide: :ref:`Scopy Overview <user_guide>`.
+
+**Setup:**
+
+.. _m2k-emu-add:
+
+    - M2k.Emu:
+        - Open Scopy.
+        - Start the iio-emu process using "adalm2000" in the dropdown and "ip:127.0.0.1" as URI.
+
+Test 1: Verifying the device scanning functionality.
+----------------------------------------------------
+
+**UID:** TST.ADD.SCAN_ALL
+
+**Description:** This test checks that the device scan correctly detects and lists available devices when initiated.
+
+**Preconditions:**
+    - Scopy is installed on the system.
+    - OS: any.
+
+**Steps:**
+    1. Connect an **ADALM2000** device to the system by USB.
+    2. Open Scopy.
+    3. Click on **Add device** (+) button.
+    4. Click on the refresh button on the right located in the **Add page** scan section.
+    5. Wait until the refresh animation stops.
+        - **Expected result:** In the "Context" dropdown, all available devices are listed, each item containing the device name/description and URI. The **ADALM2000** device [usb] must appear in the list. 
+
+**Result:** PASS/FAIL
+
+Test 2: Verifying the local device scanning functionality.
+----------------------------------------------------------
+
+**UID:** TST.ADD.SCAN_LOCAL
+
+**Description:** This test checks that the device scan correctly detects and lists available local devices when initiated.
+
+**Preconditions:**
+    - Scopy is installed on the system.
+    - There is at least one IIO device connected to the system that has local backend.
+    - OS: any.
+
+**Steps:**
+    1. Open Scopy.
+    2. Click on **Add device** (+) button.
+    3. Click on **local** checkbox located in the **Add page** scan section.
+    4. Wait until the refresh animation stops.
+        - **Expected result:** In the "Context" dropdown, all available local devices are listed, each item containing the device name/description and URI. If there is no available device the "No scanned devices available!" message is displayed.
+
+**Result:** PASS/FAIL
+
+Test 3: Verifying the ip device scanning functionality.
+-------------------------------------------------------
+
+**UID:** TST.ADD.SCAN_IP
+
+**Description:** This test checks that the device scan correctly detects and lists available ip devices when initiated.
+
+**Preconditions:**
+    - Scopy is installed on the system.
+    - There is at least one IIO device connected to the system that has ip backend.
+    - OS: any.
+
+**Steps:**
+    1. Open Scopy.
+    2. Click on **Add device** (+) button.
+    3. Click on **ip** checkbox located in the **Add page** scan section.
+    4. Wait until the refresh animation stops.
+        - **Expected result:** In the "Context" dropdown, all available ip devices are listed, each item containing the device name/description and URI. If there is no available device the "No scanned devices available!" message is displayed.
+
+**Result:** PASS/FAIL
+
+Test 4: Verifying the usb device scanning functionality.
+--------------------------------------------------------
+
+**UID:** TST.ADD.SCAN_USB
+
+**Description:** This test checks that the device scan correctly detects and lists available usb devices when initiated.
+
+**Preconditions:**
+    - Scopy is installed on the system.
+    - OS: any.
+
+**Steps:**
+    1. Connect an **ADALM2000** device to the system by USB.
+    2. Open Scopy.
+    3. Click on **Add device** (+) button.
+    4. Click on **usb** checkbox located in the **Add page** scan section.
+    5. Wait until the refresh animation stops.
+        - **Expected result:** In the "Context" dropdown, all available usb devices are listed, each item containing the device name/description and URI. The **ADALM2000** device must appear in the list. 
+
+**Result:** PASS/FAIL
+
+Test 5: Verifying the serial device scanning functionality.
+-----------------------------------------------------------
+
+**UID:** TST.ADD.SCAN_SERIAL
+
+**Description:** This test checks that the device scan correctly detects and lists available serial devices when initiated.
+
+**Preconditions:**
+    - Scopy is installed on the system.
+    - There is at least one IIO device connected to the system that has serial backend.
+    - OS: any.
+
+**Steps:**
+    1. Open Scopy.
+    2. Click on **Add device** (+) button.
+    3. Click on the refresh button on the right located in the **Add page** serial port section.
+    4. Wait until the refresh animation stops.
+        - **Expected result:** In the "Name" dropdown, all available serial devices are listed, each item containing the device name/description and URI. If there is no available device the "No scanned devices available!" message is displayed.
+
+**Result:** PASS/FAIL
+
+Test 6: Scanning with no device.
+--------------------------------
+
+**UID:** TST.ADD.SCAN_EMPTY
+
+**Description:** This test checks whether an appropriate message is displayed when no device is found.
+
+**Preconditions:**
+    - Scopy is installed on the system.
+    - OS: any.
+
+**Steps:**
+    1. Run Scopy.
+    2. Make sure that no devices using USB backends are connected to the system.
+    3. Click on **Add device** (+) button.
+    4. Click on **usb** checkbox located in the **Add page** scan section.
+    5. Wait until the refresh animation stops.
+        - **Expected result:** The "No scanned devices available!" message is displayed.
+
+**Result:** PASS/FAIL
+
+.. _tst-add-verify:
+
+Test 7: Device validation.
+--------------------------
+
+**UID:** TST.ADD.VERIFY
+
+**Description:** This test verifies that the device validation works correctly.
+
+**Test prerequisites:**
+    - :ref:`TST.EMU.EN <tst-emu-en>`.
+
+**Preconditions:**
+    - Scopy is installed on the system.
+    - iio-emu is installed on the system.
+    - Use :ref:`M2k.Emu <m2k-emu-add>` setup.
+    - OS: any.
+
+**Steps:**
+    1. Click on **Add device** (+) button.
+    2. Introduce the "ip:127.0.0.1" URI.
+    3. Click on **Verify** button.
+        - **Expected result:** A loading animation starts and after a short time a page with device details and compatible plugins is displayed. 
+
+**Result:** PASS/FAIL
+
+Test 8: Verify the "BACK" button from compatible plugin page.
+-------------------------------------------------------------
+
+**UID:** TST.ADD.PLUGINS_BACK
+
+**Description:** This test checks if the **BACK** button works correctly.
+
+**Test prerequisites:**
+    - :ref:`TST.ADD.VERIFY <tst-add-verify>`.
+
+**Preconditions:**
+    - Scopy is installed on the system.
+    - iio-emu is installed on the system.
+    - Use :ref:`M2k.Emu <m2k-emu-add>` setup.
+    - OS: any.
+
+**Steps:**
+    1. Click on **Add device** (+) button.
+    2. Introduce the "ip:127.0.0.1" URI.
+    3. Click on **Verify** button.
+    4. Click on **BACK** button.
+        - **Expected result:** The verify page is displayed.
+
+**Result:** PASS/FAIL
+
+.. _tst-add-plugins-add:
+
+Test 9: Verify the "ADD DEVICE" button from compatible plugin page (single plugin).
+-----------------------------------------------------------------------------------
+
+**UID:** TST.ADD.PLUGINS_ADD_SINGLE
+
+**Description:** This test checks if the **ADD DEVICE** button works correctly. Only the main plugin of the device is used.
+
+**Test prerequisites:**
+    - :ref:`TST.ADD.VERIFY <tst-add-verify>`.
+
+**Preconditions:**
+    - Scopy is installed on the system.
+    - iio-emu is installed on the system.
+    - Use :ref:`M2k.Emu <m2k-emu-add>` setup.
+    - OS: any.
+
+**Steps:**
+    1. Click on **Add device** (+) button.
+    2. Introduce the "ip:127.0.0.1" URI.
+    3. Click on **Verify** button.
+        - **Expected result:** Only the M2kPlugin should be selected in the compatible plugins section.
+    4. Click on **ADD DEVICE** button.
+        - **Expected result:** The device is added to the device browser, the device's info page is displayed, and the m2k tools are added to the tool menu. 
+
+**Result:** PASS/FAIL
+
+Test 10: Verify the "ADD DEVICE" button from compatible plugin page (multiple plugins).
+---------------------------------------------------------------------------------------
+
+**UID:** TST.ADD.PLUGINS_ADD_MULTIPLE
+
+**Description:** This test checks if the **ADD DEVICE** button works correctly. Multiple plugins are used.
+
+**Test prerequisites:**
+    - :ref:`TST.ADD.VERIFY <tst-add-verify>`.
+
+**Preconditions:**
+    - Scopy is installed on the system.
+    - iio-emu is installed on the system.
+    - Use :ref:`M2k.Emu <m2k-emu-add>` setup.
+    - OS: any.
+
+**Steps:**
+    1. Click on **Add device** (+) button.
+    2. Introduce the "ip:127.0.0.1" URI.
+    3. Click on **Verify** button.
+        - **Expected result:** Only the M2kPlugin should be selected in the compatible plugins section.
+    4. Select the DebuggerPlugin.
+    5. Click on **ADD DEVICE** button.
+        - **Expected result:** The device is added to the device browser, the device's info page is displayed, and all tools, including the debugger, are added to the tool menu.
+
+**Result:** PASS/FAIL
+
+Test 11: Verify the "ADD DEVICE" button from compatible plugin page with no plugin selected.
+--------------------------------------------------------------------------------------------
+
+**UID:** TST.ADD.PLUGINS_EMPTY
+
+**Description:** This test checks if the **ADD DEVICE** button works correctly.
+
+**Test prerequisites:**
+    - :ref:`TST.ADD.VERIFY <tst-add-verify>`.
+
+**Preconditions:**
+    - Scopy is installed on the system.
+    - iio-emu is installed on the system.
+    - Use :ref:`M2k.Emu <m2k-emu-add>` setup.
+    - OS: any.
+
+**Steps:**
+    1. Click on **Add device** (+) button.
+    2. Introduce the "ip:127.0.0.1" URI.
+    3. Click on **Verify** button.
+        - **Expected result:** Only the M2kPlugin should be selected in the compatible plugins section.
+    4. Uncheck the M2kPlugin.
+    5. Click on **ADD DEVICE** button.
+        - **Expected result:** A NO_PLUGIN device is added in device browser and in tool menu.
+
+**Result:** PASS/FAIL