Merge pull request #1793 from VOLTTRON/pre-5.1-release

Release 5.1

deprecated/WeatherAgent/setup.py

@@ -0,0 +1,88 @@
+# 
+# Copyright (c) 2017, Battelle Memorial Institute
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met: 
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the distribution.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+# PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
+# OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+# OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+# LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# The views and conclusions contained in the software and documentation are
+# those of the authors and should not be interpreted as representing
+# official policies, either expressed or implied, of the FreeBSD Project.
+#
+
+# This material was prepared as an account of work sponsored by an 
+# agency of the United States Government.  Neither the United States 
+# Government nor the United States Department of Energy, nor Battelle,
+# nor any of their employees, nor any jurisdiction or organization 
+# that has cooperated in the development of these materials, makes 
+# any warranty, express or implied, or assumes any legal liability 
+# or responsibility for the accuracy, completeness, or usefulness or 
+# any information, apparatus, product, software, or process disclosed,
+# or represents that its use would not infringe privately owned rights.
+#
+# Reference herein to any specific commercial product, process, or 
+# service by trade name, trademark, manufacturer, or otherwise does 
+# not necessarily constitute or imply its endorsement, recommendation, 
+# r favoring by the United States Government or any agency thereof, 
+# or Battelle Memorial Institute. The views and opinions of authors 
+# expressed herein do not necessarily state or reflect those of the 
+# United States Government or any agency thereof.
+#
+# PACIFIC NORTHWEST NATIONAL LABORATORY
+# operated by BATTELLE for the UNITED STATES DEPARTMENT OF ENERGY
+# under Contract DE-AC05-76RL01830
+#
+
+
+from os import path
+from setuptools import setup, find_packages
+
+MAIN_MODULE = 'weatheragent'
+
+# Find the agent package that contains the main module
+packages = find_packages('.')
+agent_package = ''
+for package in find_packages():
+    # Because there could be other packages such as tests
+    if path.isfile(package + '/' + MAIN_MODULE + '.py') is True:
+        agent_package = package
+if not agent_package:
+    raise RuntimeError('None of the packages under {dir} contain the file '
+                       '{main_module}'.format(main_module=MAIN_MODULE + '.py',
+                                              dir=path.abspath('.')))
+
+# Find the version number from the main module
+agent_module = agent_package + '.' + MAIN_MODULE
+_temp = __import__(agent_module, globals(), locals(), ['__version__'], -1)
+__version__ = _temp.__version__
+
+# Setup
+setup(
+    name=agent_package + 'agent',
+    version=__version__,
+    packages=packages,
+    install_requires=['volttron'],
+    entry_points={
+        'setuptools.installation': [
+            'eggsecutable = ' + agent_module + ':main',
+        ]
+    }
+)

services/core/WeatherAgent/weather/weatheragent.py → deprecated/WeatherAgent/weather/weatheragent.py

@@ -59,12 +59,8 @@
 from dateutil.parser import parse
 
 from volttron.platform.agent.utils import jsonapi
-from volttron.platform.agent import utils
-from volttron.platform.agent import matching
 from volttron.platform.messaging import headers as headers_mod, topics
 
-from volttron.platform.vip.agent import Agent, Core
-from volttron.platform.async import AsyncCall
 from volttron.platform.agent import utils
 from volttron.platform.vip.agent import *
 

docs/Makefile

@@ -1,217 +1,20 @@
-# Makefile for Sphinx documentation
+# Minimal makefile for Sphinx documentation
 #
 
 # You can set these variables from the command line.
 SPHINXOPTS    =
 SPHINXBUILD   = sphinx-build
-PAPER         =
-BUILDDIR      = build
+SPHINXPROJ    = VOLTTRON
 SOURCEDIR     = source
+BUILDDIR      = build
 
-# User-friendly check for sphinx-build
-ifeq ($(shell which $(SPHINXBUILD) >/dev/null 2>&1; echo $$?), 1)
-$(error The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed, then set the SPHINXBUILD environment variable to point to the full path of the '$(SPHINXBUILD)' executable. Alternatively you can add the directory with the executable to your PATH. If you don't have Sphinx installed, grab it from http://sphinx-doc.org/)
-endif
-
-# Internal variables.
-PAPEROPT_a4     = -D latex_paper_size=a4
-PAPEROPT_letter = -D latex_paper_size=letter
-ALLSPHINXOPTS   = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) source
-# the i18n builder cannot share the environment and doctrees with the others
-I18NSPHINXOPTS  = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) source
-
-.PHONY: help
+# Put it first so that "make" without argument is like "make help".
 help:
-	@echo "Please use \`make <target>' where <target> is one of"
-	@echo "  html       to make standalone HTML files"
-	@echo "  dirhtml    to make HTML files named index.html in directories"
-	@echo "  singlehtml to make a single large HTML file"
-	@echo "  pickle     to make pickle files"
-	@echo "  json       to make JSON files"
-	@echo "  htmlhelp   to make HTML files and a HTML help project"
-	@echo "  qthelp     to make HTML files and a qthelp project"
-	@echo "  applehelp  to make an Apple Help Book"
-	@echo "  devhelp    to make HTML files and a Devhelp project"
-	@echo "  epub       to make an epub"
-	@echo "  latex      to make LaTeX files, you can set PAPER=a4 or PAPER=letter"
-	@echo "  latexpdf   to make LaTeX files and run them through pdflatex"
-	@echo "  latexpdfja to make LaTeX files and run them through platex/dvipdfmx"
-	@echo "  text       to make text files"
-	@echo "  man        to make manual pages"
-	@echo "  texinfo    to make Texinfo files"
-	@echo "  info       to make Texinfo files and run them through makeinfo"
-	@echo "  gettext    to make PO message catalogs"
-	@echo "  changes    to make an overview of all changed/added/deprecated items"
-	@echo "  xml        to make Docutils-native XML files"
-	@echo "  pseudoxml  to make pseudoxml-XML files for display purposes"
-	@echo "  linkcheck  to check all external links for integrity"
-	@echo "  doctest    to run all doctests embedded in the documentation (if enabled)"
-	@echo "  coverage   to run coverage check of the documentation (if enabled)"
-
-.PHONY: clean
-clean:
-	rm -rf $(BUILDDIR)/* $(SOURCEDIR)/apidocs
-
-.PHONY: html
-html:
-	$(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html
-	@echo
-	@echo "Build finished. The HTML pages are in $(BUILDDIR)/html."
-
-.PHONY: dirhtml
-dirhtml:
-	$(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml
-	@echo
-	@echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml."
-
-.PHONY: singlehtml
-singlehtml:
-	$(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml
-	@echo
-	@echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml."
-
-.PHONY: pickle
-pickle:
-	$(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle
-	@echo
-	@echo "Build finished; now you can process the pickle files."
-
-.PHONY: json
-json:
-	$(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json
-	@echo
-	@echo "Build finished; now you can process the JSON files."
-
-.PHONY: htmlhelp
-htmlhelp:
-	$(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp
-	@echo
-	@echo "Build finished; now you can run HTML Help Workshop with the" \
-	      ".hhp project file in $(BUILDDIR)/htmlhelp."
-
-.PHONY: qthelp
-qthelp:
-	$(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp
-	@echo
-	@echo "Build finished; now you can run "qcollectiongenerator" with the" \
-	      ".qhcp project file in $(BUILDDIR)/qthelp, like this:"
-	@echo "# qcollectiongenerator $(BUILDDIR)/qthelp/Blah.qhcp"
-	@echo "To view the help file:"
-	@echo "# assistant -collectionFile $(BUILDDIR)/qthelp/Blah.qhc"
-
-.PHONY: applehelp
-applehelp:
-	$(SPHINXBUILD) -b applehelp $(ALLSPHINXOPTS) $(BUILDDIR)/applehelp
-	@echo
-	@echo "Build finished. The help book is in $(BUILDDIR)/applehelp."
-	@echo "N.B. You won't be able to view it unless you put it in" \
-	      "~/Library/Documentation/Help or install it in your application" \
-	      "bundle."
-
-.PHONY: devhelp
-devhelp:
-	$(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp
-	@echo
-	@echo "Build finished."
-	@echo "To view the help file:"
-	@echo "# mkdir -p $$HOME/.local/share/devhelp/Blah"
-	@echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/Blah"
-	@echo "# devhelp"
-
-.PHONY: epub
-epub:
-	$(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub
-	@echo
-	@echo "Build finished. The epub file is in $(BUILDDIR)/epub."
-
-.PHONY: latex
-latex:
-	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
-	@echo
-	@echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex."
-	@echo "Run \`make' in that directory to run these through (pdf)latex" \
-	      "(use \`make latexpdf' here to do that automatically)."
-
-.PHONY: latexpdf
-latexpdf:
-	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
-	@echo "Running LaTeX files through pdflatex..."
-	$(MAKE) -C $(BUILDDIR)/latex all-pdf
-	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
-
-.PHONY: latexpdfja
-latexpdfja:
-	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
-	@echo "Running LaTeX files through platex and dvipdfmx..."
-	$(MAKE) -C $(BUILDDIR)/latex all-pdf-ja
-	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
-
-.PHONY: text
-text:
-	$(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text
-	@echo
-	@echo "Build finished. The text files are in $(BUILDDIR)/text."
-
-.PHONY: man
-man:
-	$(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man
-	@echo
-	@echo "Build finished. The manual pages are in $(BUILDDIR)/man."
-
-.PHONY: texinfo
-texinfo:
-	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
-	@echo
-	@echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo."
-	@echo "Run \`make' in that directory to run these through makeinfo" \
-	      "(use \`make info' here to do that automatically)."
-
-.PHONY: info
-info:
-	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
-	@echo "Running Texinfo files through makeinfo..."
-	make -C $(BUILDDIR)/texinfo info
-	@echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo."
-
-.PHONY: gettext
-gettext:
-	$(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale
-	@echo
-	@echo "Build finished. The message catalogs are in $(BUILDDIR)/locale."
-
-.PHONY: changes
-changes:
-	$(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes
-	@echo
-	@echo "The overview file is in $(BUILDDIR)/changes."
-
-.PHONY: linkcheck
-linkcheck:
-	$(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck
-	@echo
-	@echo "Link check complete; look for any errors in the above output " \
-	      "or in $(BUILDDIR)/linkcheck/output.txt."
-
-.PHONY: doctest
-doctest:
-	$(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest
-	@echo "Testing of doctests in the sources finished, look at the " \
-	      "results in $(BUILDDIR)/doctest/output.txt."
-
-.PHONY: coverage
-coverage:
-	$(SPHINXBUILD) -b coverage $(ALLSPHINXOPTS) $(BUILDDIR)/coverage
-	@echo "Testing of coverage in the sources finished, look at the " \
-	      "results in $(BUILDDIR)/coverage/python.txt."
+	@$(SPHINXBUILD) -M help "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)
 
-.PHONY: xml
-xml:
-	$(SPHINXBUILD) -b xml $(ALLSPHINXOPTS) $(BUILDDIR)/xml
-	@echo
-	@echo "Build finished. The XML files are in $(BUILDDIR)/xml."
+.PHONY: help Makefile
 
-.PHONY: pseudoxml
-pseudoxml:
-	$(SPHINXBUILD) -b pseudoxml $(ALLSPHINXOPTS) $(BUILDDIR)/pseudoxml
-	@echo
-	@echo "Build finished. The pseudo-XML files are in $(BUILDDIR)/pseudoxml."
+# Catch-all target: route all unknown targets to Sphinx using the new
+# "make mode" option.  $(O) is meant as a shortcut for $(SPHINXOPTS).
+%: Makefile
+	@$(SPHINXBUILD) -M $@ "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)