Pre-compiled Binary ESP32 (v1.2)

Fixes:
-The alarm was sounding when the screen "Pick your pill" wasn't dismissed

New features:
-Telegram integration
You can now receive a message in telegram when an alert is in progress, you can choose the delay of the message (Instant to one hour) after the alert.

The first Firmware Installation:
-Download the 5 bin files in this release
-Download the esptool.exe from here [https://github.com/espressif/esptool/releases/tag/v4.7.0]
-Copy the 5 bin files to the root of the folder (with esptool.exe)
-Connect your device (the ESP32 module with the LCD) to your computer via USB
-Find the Serial COM port number (in device manager)
-open a command line inside your folder and type, change the COM port that match your device:

esptool.exe --chip esp32 --port COM4 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x1000 PillDispenser.bootloader.v1_2.bin 0x8000 PillDispenser.partitions.v1_2.bin 0xe000 boot_app0.bin 0x10000 PillDispenser.esp32.v1_2.bin 0x3D0000 PillDispenser.spiffs.v1_2.bin

In the future if there's an update:
Use the OTA update page in the web portal of the device, only 2 bin files are needed (esp32 and spiff)