Add SYC USB CCID Reader

readers/SYC_USB_CCID_Reader.txt

@@ -0,0 +1,55 @@
+ idVendor: 0x0483
+  iManufacturer: SYC
+ idProduct: 0x2017
+  iProduct: USB CCID Reader
+ bcdDevice: 1.02 (firmware release?)
+ bLength: 9
+ bDescriptorType: 4
+ bInterfaceNumber: 0
+ bAlternateSetting: 0
+ bNumEndpoints: 3
+  bulk-IN, bulk-OUT and Interrupt-IN
+ bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
+ bInterfaceSubClass: 0
+ bInterfaceProtocol: 0
+  bulk transfer, optional interrupt-IN (CCID)
+ Can't get iInterface string: LIBUSB_ERROR_PIPE
+ CCID Class Descriptor
+  bLength: 0x36
+  bDescriptorType: 0x21
+  bcdCCID: 1.10
+  bMaxSlotIndex: 0x00
+  bVoltageSupport: 0x07
+   5.0V
+   3.0V
+   1.8V
+  dwProtocols: 0x0000 0x0003
+   T=0
+   T=1
+  dwDefaultClock: 4.800 MHz
+  dwMaximumClock: 16.000 MHz
+  bNumClockSupported: 0 (will use whatever is returned)
+   IFD does not support GET CLOCK FREQUENCIES request: LIBUSB_ERROR_PIPE
+  dwDataRate: 12903 bps
+  dwMaxDataRate: 600000 bps
+  bNumDataRatesSupported: 0 (will use whatever is returned)
+   IFD does not support GET_DATA_RATES request: LIBUSB_ERROR_PIPE
+  dwMaxIFSD: 252
+  dwSynchProtocols: 0x00000000
+  dwMechanical: 0x00000000
+   No special characteristics
+  dwFeatures: 0x000100BA
+   ....02 Automatic parameter configuration based on ATR data
+   ....08 Automatic ICC voltage selection
+   ....10 Automatic ICC clock frequency change according to parameters
+   ....20 Automatic baud rate change according to frequency and Fi, Di params
+   ....80 Automatic PPS made by the CCID
+   01.... TPDU level exchange
+  dwMaxCCIDMessageLength: 271 bytes
+  bClassGetResponse: 0xFF
+   echoes the APDU class
+  bClassEnvelope: 0xFF
+   echoes the APDU class
+  wLcdLayout: 0x0000
+  bPINSupport: 0x00
+  bMaxCCIDBusySlots: 1

readers/supported_readers.txt

@@ -892,6 +892,9 @@
 # Swissbit
 0x1370:0x0901:Swissbit Secure USB PU-50n SE/PE
 
+# SYC
+0x0483:0x2017:SYC USB CCID Reader
+
 # SYNNIX
 0x1206:0x2105:SYNNIX STD200
 0x1206:0x2107:SYNNIX CL-2100R