Dev various changes, preparing for 5.11

coatjava/10.0.7/rga_spring2018.yaml → coatjava/11.1.0/rga_spring2018.yaml

@@ -1,7 +1,7 @@
 # YAML file for RG-A Spring2018 Pass2 simulations
 # Uses AI-assisted tracking and denoising
 # Compatible with:
-# - coatjava 10.0.3 or later              
+# - coatjava 11.1.0 or later              
 # - gemc 5.2 or later
 # THIS IS A PLACEHOLDER UNTIL THE PASS2 DATA PROCESSING CONDITIONS WILL BE FINALIZED
 io-services:
@@ -66,7 +66,9 @@ services:
     name: MC
 configuration:
   global:
-    variation: rga_fall2018_mc
+    dcMinistagger: "NOTONREFWIRE"
+    dcFeedthroughs: "OFF"
+    variation: rga_spring2018_mc
 #    timestamp: 07/27/2023-12:00:00
 # uncomment to use bank filtering based on schema, schema path should be updated 
 # to point to the correct coatjava folder
@@ -81,7 +83,7 @@ configuration:
     DCCR:
       rawBankGroup: "NOISE1"
     MLTD:
-      run: "5197"
+      run: "4003"
     DCHAI:
       outputBankPrefix: "HB"
     RTPC:

gemc/5.10/ddvcs.gcard

@@ -48,17 +48,31 @@
 	<option name="HALL_MATERIAL" value="Vacuum"/>
 
 
-	<option name="INTEGRATEDRAW" value="*"/>
-	<option name="RECORD_PASSBY" value="0"/>
-
 	<option name="BEAM_P"    value="e-, 11*GeV, 0*deg, 0*deg" />
 <!--	<option name="SPREAD_P"  value="1*GeV, 10*deg, 180*deg" />-->
 
-	<!-- luminosity conditions -->
-	<option name="LUMI_EVENT"     value="50000, 250*ns, 4*ns" />
-	<option name="LUMI_P"         value="e-, 11*GeV, 0*deg, 0*deg" />
-	<option name="LUMI_V"         value="(0.,0.,-4.5.)cm" />
-	<option name="LUMI_SPREAD_V"  value="(0.01, 0.01)cm" />
+        <option name="SAVE_ALL_MOTHERS" value="1"/>
+        <option name="RECORD_OPTICALPHOTONS"   value="1"/>
+        <option name="SKIPREJECTEDHITS"    value="1" />
+
+        <!-- Uncomment this line to save the true information (necessary for Truth Matching -->
+        <!--  <option name="INTEGRATEDRAW"    value="*" /> -->
+
+        <!--  Time window defined by LUMI_EVENT -->
+        <option name="LUMI_EVENT"  value="0, 248.5*ns, 4*ns" />
+        <!--  Uncomment this (and replace the LUMI_EVENT Above) to simulate 10^35 luminosity beam on a 5cm liquid hydrogen target, use 124K e- / event   -->
+        <!--  Scale accordingly for different target / luminosity  -->
+        <!--
+        <option name="LUMI_EVENT"     value="124000, 248.5*ns, 4*ns" />
+        <option name="LUMI_P"         value="e-, 10.6*GeV, 0*deg, 0*deg" />
+        <option name="LUMI_V"         value="(0.0, 0.0, -10)cm" />
+        <option name="LUMI_SPREAD_V"  value="(0.03, 0.03)cm" />
+        -->
+
+        <!--  RF Signal needs event time window defined by LUMI_EVENT -->
+        <!--  Reference position set as target shift below -->
+        <option name="RFSETUP"     value="clas12_ccdb" />
+        <option name="RFSTART"     value="eventVertex, 0, 0, -30.0" />
 
 	<option name="PRINT_EVENT"    value="1" />
 
@@ -67,7 +81,6 @@
 	<option name="RUNNO"                   value="11" />
 	<option name="DIGITIZATION_VARIATION"  value="rga_fall2018_mc" />
 
-
 	<detector name="airPipe">
 		<existence exist="no" />
 	</detector>

gemc/dev/clas12-default.gcard

@@ -77,7 +77,7 @@
 	<option name="RUNNO"    value="11" />
 	<option name="DIGITIZATION_VARIATION"  value="default" />
 
-	<!--  Do not track staff after the apex -->
+	<!--  Do not track staff after the downstream shielding -->
 	<option name="MAX_Z_POS" value="9000"/>
 
 	<!--  Time window defined by LUMI_EVENT -->
@@ -98,7 +98,8 @@
 
 	<!-- production threshold for passive volumes -->
 	<!-- beamline shielding: 2cm-->
-	<option name="PRODUCTIONCUTFORVOLUMES" value="innerShieldAndFlange, outerFlange, outerMount, nut1, nut2, nut3, nut4, nut5, nut6, nut7, nut8, nut9, taggerInnerShield,  main-cone, main-cone, adjuster1, adjuster2, adjuster3,   20" />
+	<option name="PRODUCTIONCUTFORVOLUMES" value="innerShieldAndFlange, outerFlange, outerMount, nut1, nut2, nut3, nut4, nut5, nut6, nut7, nut8, nut9, taggerInnerShield,  main-cone,  adjuster1, adjuster2, adjuster3, Apex_Shield_Lead_Fill, Apex_Shield_PCAL_Hub, Downstream_Beam_tube_Segment_1, Downstream_Beam_tube_Segment_2, Torus_Beam_Tube_Reducer_2, Torus_Exit_Shield_Casing, Torus_Exit_Shield_Lead_Fill, 20"/>
+
 
 
 

gemc/dev/ddvcs.gcard

@@ -41,17 +41,31 @@
 	<option name="HALL_MATERIAL" value="Vacuum"/>
 
 
-	<option name="INTEGRATEDRAW" value="*"/>
-	<option name="RECORD_PASSBY" value="0"/>
-
 	<option name="BEAM_P"    value="e-, 11*GeV, 0*deg, 0*deg" />
 <!--	<option name="SPREAD_P"  value="1*GeV, 10*deg, 180*deg" />-->
 
-	<!-- luminosity conditions -->
-	<option name="LUMI_EVENT"     value="50000, 250*ns, 4*ns" />
-	<option name="LUMI_P"         value="e-, 11*GeV, 0*deg, 0*deg" />
-	<option name="LUMI_V"         value="(0.,0.,-4.5.)cm" />
-	<option name="LUMI_SPREAD_V"  value="(0.01, 0.01)cm" />
+        <option name="SAVE_ALL_MOTHERS" value="1"/>
+        <option name="RECORD_OPTICALPHOTONS"   value="1"/>
+        <option name="SKIPREJECTEDHITS"    value="1" />
+
+        <!-- Uncomment this line to save the true information (necessary for Truth Matching -->
+        <!--  <option name="INTEGRATEDRAW"    value="*" /> -->
+
+        <!--  Time window defined by LUMI_EVENT -->
+        <option name="LUMI_EVENT"  value="0, 248.5*ns, 4*ns" />
+        <!--  Uncomment this (and replace the LUMI_EVENT Above) to simulate 10^35 luminosity beam on a 5cm liquid hydrogen target, use 124K e- / event   -->
+        <!--  Scale accordingly for different target / luminosity  -->
+        <!--
+        <option name="LUMI_EVENT"     value="124000, 248.5*ns, 4*ns" />
+        <option name="LUMI_P"         value="e-, 10.6*GeV, 0*deg, 0*deg" />
+        <option name="LUMI_V"         value="(0.0, 0.0, -10)cm" />
+        <option name="LUMI_SPREAD_V"  value="(0.03, 0.03)cm" />
+        -->
+
+        <!--  RF Signal needs event time window defined by LUMI_EVENT -->
+        <!--  Reference position set as target shift below -->
+        <option name="RFSETUP"     value="clas12_ccdb" />
+        <option name="RFSTART"     value="eventVertex, 0, 0, -30.0" />
 
 	<option name="PRINT_EVENT"    value="1" />
 

gemc/dev/rga_fall2018.gcard

@@ -77,7 +77,7 @@
 	<option name="RUNNO"    value="11" />
 	<option name="DIGITIZATION_VARIATION"  value="rga_fall2018_mc" />
 
-	<!--  Do not track staff after the apex -->
+	<!--  Do not track staff after the downstream shielding -->
 	<option name="MAX_Z_POS" value="9000"/>
 
 	<!--  Time window defined by LUMI_EVENT -->
@@ -98,7 +98,8 @@
 
 	<!-- production threshold for passive volumes -->
 	<!-- beamline shielding: 2cm-->
-	<option name="PRODUCTIONCUTFORVOLUMES" value="innerShieldAndFlange, outerFlange, outerMount, nut1, nut2, nut3, nut4, nut5, nut6, nut7, nut8, nut9, taggerInnerShield,  main-cone, main-cone, adjuster1, adjuster2, adjuster3,   20" />
+	<option name="PRODUCTIONCUTFORVOLUMES" value="innerShieldAndFlange, outerFlange, outerMount, nut1, nut2, nut3, nut4, nut5, nut6, nut7, nut8, nut9, taggerInnerShield,  main-cone,  adjuster1, adjuster2, adjuster3, Apex_Shield_Lead_Fill, Apex_Shield_PCAL_Hub, Downstream_Beam_tube_Segment_1, Downstream_Beam_tube_Segment_2, Torus_Beam_Tube_Reducer_2, Torus_Exit_Shield_Casing, Torus_Exit_Shield_Lead_Fill, 20"/>
+
 
 
 

gemc/dev/rga_fall2018_target_at_m3.5.gcard

@@ -77,7 +77,7 @@
 	<option name="RUNNO"    value="11" />
 	<option name="DIGITIZATION_VARIATION"  value="rga_fall2018_mc" />
 
-	<!--  Do not track staff after the apex -->
+	<!--  Do not track staff after the downstream shielding -->
 	<option name="MAX_Z_POS" value="9000"/>
 
 	<!--  Time window defined by LUMI_EVENT -->
@@ -98,7 +98,8 @@
 
 	<!-- production threshold for passive volumes -->
 	<!-- beamline shielding: 2cm-->
-	<option name="PRODUCTIONCUTFORVOLUMES" value="innerShieldAndFlange, outerFlange, outerMount, nut1, nut2, nut3, nut4, nut5, nut6, nut7, nut8, nut9, taggerInnerShield,  main-cone, main-cone, adjuster1, adjuster2, adjuster3,   20" />
+	<option name="PRODUCTIONCUTFORVOLUMES" value="innerShieldAndFlange, outerFlange, outerMount, nut1, nut2, nut3, nut4, nut5, nut6, nut7, nut8, nut9, taggerInnerShield,  main-cone,  adjuster1, adjuster2, adjuster3, Apex_Shield_Lead_Fill, Apex_Shield_PCAL_Hub, Downstream_Beam_tube_Segment_1, Downstream_Beam_tube_Segment_2, Torus_Beam_Tube_Reducer_2, Torus_Exit_Shield_Casing, Torus_Exit_Shield_Lead_Fill, 20"/>
+
 
 
 

gemc/dev/rga_spring2018.gcard

@@ -77,7 +77,7 @@
 	<option name="RUNNO"    value="11" />
 	<option name="DIGITIZATION_VARIATION"  value="rga_spring2018_mc" />
 
-	<!--  Do not track staff after the apex -->
+	<!--  Do not track staff after the downstream shielding -->
 	<option name="MAX_Z_POS" value="9000"/>
 
 	<!--  Time window defined by LUMI_EVENT -->
@@ -98,7 +98,8 @@
 
 	<!-- production threshold for passive volumes -->
 	<!-- beamline shielding: 2cm-->
-	<option name="PRODUCTIONCUTFORVOLUMES" value="innerShieldAndFlange, outerFlange, outerMount, nut1, nut2, nut3, nut4, nut5, nut6, nut7, nut8, nut9, taggerInnerShield,  main-cone, main-cone, adjuster1, adjuster2, adjuster3,   20" />
+	<option name="PRODUCTIONCUTFORVOLUMES" value="innerShieldAndFlange, outerFlange, outerMount, nut1, nut2, nut3, nut4, nut5, nut6, nut7, nut8, nut9, taggerInnerShield,  main-cone,  adjuster1, adjuster2, adjuster3, Apex_Shield_Lead_Fill, Apex_Shield_PCAL_Hub, Downstream_Beam_tube_Segment_1, Downstream_Beam_tube_Segment_2, Torus_Beam_Tube_Reducer_2, Torus_Exit_Shield_Casing, Torus_Exit_Shield_Lead_Fill, 20"/>
+
 
 
 

gemc/dev/rga_spring2019.gcard

@@ -77,7 +77,7 @@
 	<option name="RUNNO"    value="11" />
 	<option name="DIGITIZATION_VARIATION"  value="rga_spring2019_mc" />
 
-	<!--  Do not track staff after the apex -->
+	<!--  Do not track staff after the downstream shielding -->
 	<option name="MAX_Z_POS" value="9000"/>
 
 	<!--  Time window defined by LUMI_EVENT -->
@@ -98,7 +98,8 @@
 
 	<!-- production threshold for passive volumes -->
 	<!-- beamline shielding: 2cm-->
-	<option name="PRODUCTIONCUTFORVOLUMES" value="innerShieldAndFlange, outerFlange, outerMount, nut1, nut2, nut3, nut4, nut5, nut6, nut7, nut8, nut9, taggerInnerShield,  main-cone, main-cone, adjuster1, adjuster2, adjuster3,   20" />
+	<option name="PRODUCTIONCUTFORVOLUMES" value="innerShieldAndFlange, outerFlange, outerMount, nut1, nut2, nut3, nut4, nut5, nut6, nut7, nut8, nut9, taggerInnerShield,  main-cone,  adjuster1, adjuster2, adjuster3, Apex_Shield_Lead_Fill, Apex_Shield_PCAL_Hub, Downstream_Beam_tube_Segment_1, Downstream_Beam_tube_Segment_2, Torus_Beam_Tube_Reducer_2, Torus_Exit_Shield_Casing, Torus_Exit_Shield_Lead_Fill, 20"/>
+
 
 
 

gemc/dev/rgb_fall2019.gcard

@@ -77,7 +77,7 @@
 	<option name="RUNNO"    value="11" />
 	<option name="DIGITIZATION_VARIATION"  value="rgb_fall2019_mc" />
 
-	<!--  Do not track staff after the apex -->
+	<!--  Do not track staff after the downstream shielding -->
 	<option name="MAX_Z_POS" value="9000"/>
 
 	<!--  Time window defined by LUMI_EVENT -->
@@ -98,7 +98,8 @@
 
 	<!-- production threshold for passive volumes -->
 	<!-- beamline shielding: 2cm-->
-	<option name="PRODUCTIONCUTFORVOLUMES" value="innerShieldAndFlange, outerFlange, outerMount, nut1, nut2, nut3, nut4, nut5, nut6, nut7, nut8, nut9, taggerInnerShield,  main-cone, main-cone, adjuster1, adjuster2, adjuster3,   20" />
+	<option name="PRODUCTIONCUTFORVOLUMES" value="innerShieldAndFlange, outerFlange, outerMount, nut1, nut2, nut3, nut4, nut5, nut6, nut7, nut8, nut9, taggerInnerShield,  main-cone,  adjuster1, adjuster2, adjuster3, Apex_Shield_Lead_Fill, Apex_Shield_PCAL_Hub, Downstream_Beam_tube_Segment_1, Downstream_Beam_tube_Segment_2, Torus_Beam_Tube_Reducer_2, Torus_Exit_Shield_Casing, Torus_Exit_Shield_Lead_Fill, 20"/>
+
 
 
 

gemc/dev/rgb_spring2019.gcard

@@ -77,7 +77,7 @@
 	<option name="RUNNO"    value="11" />
 	<option name="DIGITIZATION_VARIATION"  value="rgb_spring2019_mc" />
 
-	<!--  Do not track staff after the apex -->
+	<!--  Do not track staff after the downstream shielding -->
 	<option name="MAX_Z_POS" value="9000"/>
 
 	<!--  Time window defined by LUMI_EVENT -->
@@ -98,7 +98,8 @@
 
 	<!-- production threshold for passive volumes -->
 	<!-- beamline shielding: 2cm-->
-	<option name="PRODUCTIONCUTFORVOLUMES" value="innerShieldAndFlange, outerFlange, outerMount, nut1, nut2, nut3, nut4, nut5, nut6, nut7, nut8, nut9, taggerInnerShield,  main-cone, main-cone, adjuster1, adjuster2, adjuster3,   20" />
+	<option name="PRODUCTIONCUTFORVOLUMES" value="innerShieldAndFlange, outerFlange, outerMount, nut1, nut2, nut3, nut4, nut5, nut6, nut7, nut8, nut9, taggerInnerShield,  main-cone,  adjuster1, adjuster2, adjuster3, Apex_Shield_Lead_Fill, Apex_Shield_PCAL_Hub, Downstream_Beam_tube_Segment_1, Downstream_Beam_tube_Segment_2, Torus_Beam_Tube_Reducer_2, Torus_Exit_Shield_Casing, Torus_Exit_Shield_Lead_Fill, 20"/>
+
 
 
 

gemc/dev/rgc_fall2022.gcard

@@ -76,7 +76,7 @@
 	<option name="RUNNO"    value="11" />
 	<option name="DIGITIZATION_VARIATION"  value="rgc_summer2022_mc" />
 
-	<!--  Do not track staff after the apex -->
+	<!--  Do not track staff after the downstream shielding -->
 	<option name="MAX_Z_POS" value="9000"/>
 
 	<!--  Time window defined by LUMI_EVENT -->

gemc/dev/rgc_summer2022.gcard

@@ -77,7 +77,7 @@
 	<option name="RUNNO"    value="11" />
 	<option name="DIGITIZATION_VARIATION"  value="rgc_summer2022_mc" />
 
-	<!--  Do not track staff after the apex -->
+	<!--  Do not track staff after the downstream shielding -->
 	<option name="MAX_Z_POS" value="9000"/>
 
 	<!--  Time window defined by LUMI_EVENT -->

gemc/dev/rge_spring2024_LD2-Al-liq.gcard

@@ -0,0 +1 @@
+rge_spring2024_LD2-Al-sol.gcard