Fix for 5XL build issue.

src/binmode/irtoy-air.c

@@ -164,10 +164,10 @@ typedef struct _IR_PULSE {
 static void ir_rx_pulse_packet(IR_PULSE *pulse_buffer, bool is_mark, uint16_t pulse_length){
     if(is_mark){
         pulse_buffer->identifier_mark_or_space = '+'; //mark
-        pulse_length = pulse_length |= 0x0001; //always set low bit for mark
+        //pulse_length = pulse_length |= 0x0001; //always set low bit for mark
     }else{
         pulse_buffer->identifier_mark_or_space = '-'; //space
-        pulse_length = pulse_length &= 0xfffe; //always clear low bit for space
+        //pulse_length = pulse_length &= 0xfffe; //always clear low bit for space
     }
     pulse_buffer->pulse_length_msb = (uint8_t)(pulse_length >> 8);
     pulse_buffer->pulse_length_lsb = (uint8_t)(pulse_length);
@@ -194,11 +194,24 @@ static void ir_rx_modulation_packet(IR_MODULATION *modulation_buffer, uint16_t p
 }
 
 /*
-$36:420,280,168,280,168,616,168,448,168,448,168,280,168,280,168,280,168,280,168,616,168,616,168,448,168,616,168,280,168,280,168,280,168,448,168,90804,;
+$36:420,280,168,280,420,;
 $ start character
 : carrier frequency / 1000 (this comes from the learner sensor)
-ASCII decimals representing the lengths of pulse and no-pulse in uS (anyone think that 90804 is a timeout?). CSV formatted, including the final value
+ASCII decimals representing the lengths of pulse and no-pulse in uS CSV formatted, including the final value
 ; Terminated with ;
+
+    $ - Start AIR packet
+    36 - Modulation frequency in kHz
+    : - Start of IR pulse timing data (in us), beginning with MARK (IR pulse)
+    900 - Length of first IR MARK/pulse (in us)
+    , - Each value separated by a comma, including after the final timeout
+    850 - Length of first IR SPACE/no pulse (in us)
+    , - Each value separated by a comma, including after the final timeout
+    … More MARK/SPACE timing pairs
+    65535 - Final timeout, when no IR MARK has been sensed in 65535us
+    , - Remember the comma after the final timing
+    ; - Terminated with a semicolon
+
 */
 // Use PIO to count 1uS ticks for each pulse and no-pulse, with timeout?
 void irtoy_air_service(void){
@@ -216,7 +229,7 @@ void irtoy_air_service(void){
 
     IR_MODULATION modulation;
     modulation.identifier_modulation = 'M';
-    modulation.measured_sample_count = 5;
+    modulation.measured_sample_count = 1;
     modulation.always_LF = '\n';
 
     while(true){
@@ -227,7 +240,7 @@ void irtoy_air_service(void){
             continue;
         }else if(send_id){
             send_id=false;
-            const char version[] = {'\n','!','B','P',' ','V', (BP_VER + 0x30), HARDWARE_VERSION, FIRMWARE_VERSION_H, FIRMWARE_VERSION_L,'!','\n', 0x00};
+            const char version[] = {'\n','!','B','P',' ','V', HARDWARE_VERSION, FIRMWARE_VERSION_H, FIRMWARE_VERSION_L,'!','\n', 0x00};
             for (uint32_t i = 0; i < strlen(version); i++) {
                 bin_tx_fifo_put(version[i]);
             }