Common Questions Fixes

By @whoswhip

How to run Aimmy?

To run Aimmy you first need all of the dependencies which are

• .NET v7
• .NET v8
• VCRedist Run "TotallyNotAimmyV2.exe". if you run "AimmyLauncher.exe" run it as admin.

Steps to use Aimmy

• Load a model
• Turn on the "Aim Assist"

How to load a model?

Go to the model tab, which looks like a sheet of paper(If you're running AimmyV2 and above), then select "Local Models", and select the model you would like to load. If it gives an error such as "Error starting the model: [ErrorCode:RuntimeException]" that usually means your GPU is too weak to use Aimmy.

How to load a config?

Once again go to the model tab, which looks like a sheet of paper(If you're running AimmyV2 and above), then select "Local Configs", and select the config you would like to load.

Where can I get models?

• You can go to the "Downloadable Models" in the model tab, which looks like a sheet of paper(If you're running AimmyV2 and above), then search for the model/game you would like a model for.
• You can go to our Discord channel where community members post their models @ https://discord.gg/aimmy

Where can I get configs?

• You can go to the "Downloadable Config" in the model tab, which looks like a sheet of paper(If you're running AimmyV2 and above), then search for the config/game you would like a model for.
• You can go to our Discord channel where community members post their configs @ https://discord.gg/aimmy then filter the search for "Preset/Configs"

Where to put Models/Configs?

Models (.onnx) go in: 📂 AimmyV2 ↳ 📂 bin ↳ 📂 Models

Configs (.cfg) go in: 📂 AimmyV2 ↳ 📂 bin ↳ 📂 configs

How to configure Aimmy to your liking

• Find a model or make a model for the game you're playing, do try universal models if you can't find one for your game
• Test the model, see if the AI Confidence needs to be lowered or raised, also check if the "Mouse Sensitivity" needs to be lowered or raised

Aimmy being too snappy/not snapping?

Too snappy

• Increase the "Mouse Sensitivity" till it gets slower/less snappy
• If you're on Aimmy V2 Beta then you can enable EMA Smoothening and lower the value of the smoothening, in the Aim Config area in the main tab of Aimmy

Not snappy

• Decrease the "Mouse Sensitivity" till it gets quicker/more snappy
• If you're on Aimmy V2 Beta then you can enable EMA Smoothening and increase the value of the smoothening, in the Aim Config area in the main tab of Aimmy

Aimmy flicking or jittering all over the place?

• Increase Aimmy Sensitivity
• Increase AI Confidence
• Lower/Turn off Mouse Jitter

Aimmy isn't aiming on the target?

• Increase/Decrease the X Offset or Y Offset until its good, for example if Aimmy is aiming too far left you would Increase the X Offset, and if it was aiming too low you would Decrease the Y Offset
• If you're on Aimmy V2 Beta you will have access to percentage based Offsets, once enabled this will always aim at the middle of the detection by default, however you can change this in the Aim Config area of the main tab in Aimmy.

Why is the fov following my mouse?

This is due to "Detection Area Type" being set to "Closest to mouse", closest to mouse will follow your mouse and move your mouse to the detection closest to your mouse.

Debugging a model

At the bottom of the main tab you can enable the "Show Detected Player" toggle and the "Show AI Confidence" to find what AI Confidence you would need for your config

How can I give my configuration to other people?

• You can tell people what settings to use, for example "8.0 Sens, 5 X Offset, 0 Y Offset, 35% AI Confidence"
• You can export your config by going to the settings tab, then near the bottom the tab there will be a button where you can export your config, this will be saved to Aimmy Directory>bin>configs

Mouse Movement Methods

• Mouse Event, most detected method of moving the mouse.
• LG Hub(REQUIRES GHUB 2021 VERSION), Less detected but big games tend to detect it. ╠═ LGHUB not working? GHUB needs to be open and on the 2021 version. Aimmy may also need to be ran as admin. ╠═ All available downloads are Discord, cdn.cometrbx.xyz, LG Direct, whoswhip.top ╚ File Hashes
• Razer Synapse(REQUIRES A RAZER DEVICE), Detection is unknown, is detected on Valorant.
• DDXoft, Detection is unknown, is still detected on Valorant

Can this get me banned?

The short answer is yes (on certain anti-cheats). This is only Anti-Cheat dependent, Anti-Cheats such as EAC are slightly dtc (very risky) and Anti-Cheats like Riot Vangaurd, you will get banned within one match. Games like Roblox's terrible Anti-Cheat are completely undetected. Just cause the anti-cheat might not detect it doesn't mean you can't get banned off of reports!

You can find a list of Detected Games @ https://discord.gg/aimmy

Spoofer & Alternative

For those interested in circumventing anti-cheat measures, it is recommended to exercise caution and refrain from using unreliable sources. A reputable option for spoofing, which has demonstrated effectiveness against various anti-cheat systems, is available at https://voidwoofs.com/.