ncmpconf

# ##################################################
#  this is example configuration file, copy it to ##
#  ~/.ncmpcpp/config and set up your preferences  ##
# ##################################################
#
# ### directories ######
#
#  Directory for storing ncmpcpp related files.
#  Changing it is useful if you want to store
#  everything somewhere else and provide command
#  line setting for alternative location to config
#  file which defines that while launching ncmpcpp.
#
#
#ncmpcpp_directory = "~/.ncmpcpp"
#
#
#  Directory for storing downloaded lyrics. It
#  defaults to ~/.lyrics since other MPD clients
#  (eg. ncmpc) also use that location.
#
#
#lyrics_directory = "~/.lyrics"
#
# ### connection settings #####
#
#  set it in order to make tag editor and renaming files work properly
#
mpd_host = "10.0.0.8"
#
#mpd_port = "6600"
#
#mpd_music_dir = ""
#
#mpd_connection_timeout = "5"
#
mpd_crossfade_time = "3"
#
#mpd_communication_mode = "notifications" (polling/notifications)
#
# ### music visualizer #####
#
#  Note: In order to make music visualizer work you'll
#  need to use mpd fifo output, whose format parameter
#  has to be set to 44100:16:1 for mono visualization
#  or 44100:16:2 for stereo visualization. Example
#  configuration (it has to be put into mpd.conf):
#
#  audio_output {
#         type            "fifo"
#         name            "My FIFO"
#         path            "/tmp/mpd.fifo"
#         format          "44100:16:2"
#  }
#
#
#
#  If you set format to 44100:16:2, make it 'yes'.
#
#
visualizer_in_stereo = "yes"
#
visualizer_fifo_path = "/tmp/mpd.fifo"
#
#
#  Note: Below parameter is needed for ncmpcpp
#  to determine which output provides data for
#  visualizer and thus allow syncing between
#  visualization and sound as currently there
#  are some problems with it.
#
#
visualizer_output_name = "My FIFO"
#
#
#  Note: Below parameter defines how often ncmpcpp
#  has to "synchronize" visualizer and audio outputs.
#  30 seconds is optimal value, but if you experience
#  synchronization problems, set it to lower value.
#  Keep in mind that sane values start with >=10.
#
#
#visualizer_sync_interval = "30"
#
#
#  Note: To enable spectrum frequency visualization
#  you need to compile ncmpcpp with fftw3 support.
#
#
#visualizer_type = "wave" (spectrum/wave)
#
#visualizer_look = "◆│"
#
# ### system encoding #####
#
#  ncmpcpp should detect your charset encoding
#  but if it failed to do so, you can specify
#  charset encoding you are using here.
#
#  Note: You can see whether your ncmpcpp build
#  supports charset detection by checking output
#  of `ncmpcpp --version`.
#
#  Note: Since MPD uses utf8 by default, setting
#  this option makes sense only if your encoding
#  is different.
#
#
#system_encoding = ""
#
# ### delays #####
#
#  delay after playlist highlighting will be disabled (0 = don't disable)
#
#playlist_disable_highlight_delay = "5"
#
#  defines how long various messages are supposed to be visible
#
message_delay_time = "2"
#
# ### song format #####
#
#  for song format you can use:
#
#  %l - length
#  %f - filename
#  %D - directory
#  %a - artist
#  %A - album artist
#  %t - title
#  %b - album
#  %y - year
#  %n - track number (01/12 -> 01)
#  %N - full track info (01/12 -> 01/12)
#  %g - genre
#  %c - composer
#  %p - performer
#  %d - disc
#  %C - comment
#  $R - begin right alignment
#
#  you can also put them in { } and then it will be displayed
#  only if all requested values are available and/or define alternate
#  value with { }|{ } eg. {%a - %t}|{%f}
#
#  Note: If you want to set limit on maximal length of a tag, just
#  put the appropriate number between % and character that defines
#  tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
#
#  Note: Format that is similar to "%a - %t" (i.e. without any additional
#  braces) is equal to "{%a - %t}", so if one of the tags is missing,
#  you'll get nothing.
#
#  text can also have different color than the main window has,
#  eg. if you want length to be green, write $3%l$9
#
#  available values:
#
#  - 0 - default window color (discards all other colors)
#  - 1 - black
#  - 2 - red
#  - 3 - green
#  - 4 - yellow
#  - 5 - blue
#  - 6 - magenta
#  - 7 - cyan
#  - 8 - white
#  - 9 - end of current color
#
#  Note: colors can be nested.
#
#
# song_list_format = "{%a - }{%t}|{$8%f$9}$R{$3(%l)$9}"
# song_list_format = "$3%n$9$1▕ $1$4%a$9$1 - $1$6%t$1     $R$2%b$9"
# song_list_format = "{$8%n▕ $9}{$2%a $9}{$4%t$9}|{$5%f$9}$R{$5 %b$9}{$8 %l$9}"
#
#song_status_format = "{{%a{ \"%b\"{ (%y)}} - }{%t}}|{%f}"
#
#song_library_format = "{%n - }{%t}|{%f}"
#
song_list_format = "{$5%a} $8»$5» {$8%t}|{$8%f}$R{$2%b}"
song_status_format = "{$8%a} $8»$5» $b{$1%t}|{$1%f}$/b"
song_library_format = "{%n - }{%t}|{%f}"
#
#tag_editor_album_format = "{(%y) }%b"
#
#
#  Note: Below variables are for alternative version of user's interface.
#  Their syntax supports all tags and colors listed above plus some extra
#  markers used for text attributes. They are followed by character '$'.
#  After that you can put:
#
#  - b - bold text
#  - u - underline text
#  - r - reverse colors
#  - a - use alternative character set
#
#  If you don't want to use an attribute anymore, just put it again, but
#  this time insert character '/' between '$' and attribute character,
#  e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag or filename
#  with reversed colors.
#
#
#alternative_header_first_line_format = "$b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b"
#
#alternative_header_second_line_format = "{{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}"

alternative_header_first_line_format = "{$b$1%t$9$/b}"
alternative_header_second_line_format ="$0{%a} $b$8-$9$/b {%b}$9"

#
#
#  Note: Below variables also supports
#  text attributes listed above.
#
#
now_playing_prefix = "$5>>$b "
#
# now_playing_suffix = "$\b"
#
#browser_playlist_prefix = "$2playlist$9 "
#
#selected_item_prefix = "$6"
#
#selected_item_suffix = "$9"
#
#  colors are not supported for below variable
#
song_window_title_format = "ncmpcpp: {%a - }{%t}|{%f}"
#
# ### columns settings #####
#
#  syntax of song columns list format is "column column etc."
#
#  - syntax for each column is:
#
#  (width of column)[column's color]{displayed tag}
#
#  Note: Width is by default in %, if you want a column to
#  have fixed size, add 'f' after the value, e.g. (10)[white]{a}
#  will be the column that take 10% of screen (so the real column's
#  width will depend on actual screen size), whereas (10f)[white]{a}
#  will take 10 terminal cells, no matter how wide the screen is.
#
#  - color is optional (if you want the default one, type [])
#
#  Note: You can give a column additional attributes by putting appropriate
#  character after displayed tag character. Available attributes are:
#
#  - r - column will be right aligned
#  - E - if tag is empty, empty tag marker won't be displayed
#
#  You can also:
#
#  - give a column custom name by putting it after attributes,
#    separated with character ':', e.g. {lr:Length} gives you
#    right aligned column of lengths named "Length".
#
#  - define sequence of tags, that have to be displayed in case
#    predecessor is empty in a way similar to the one in classic
#    song format, i.e. using '|' character, e.g. {a|c|p:Owner}
#    creates column named "Owner" that tries to display artist
#    tag and then composer and performer if previous ones are
#    not available.
#
#
#song_columns_list_format = "(7f)[green]{l} (25)[cyan]{a} (40)[]{t|f} (30)[red]{b}"
# song_columns_list_format = "(5f)[green]{n} (22)[white]{a} (34)[white]{t} (25)[white]{b} (7f)[green]{lr}"
song_columns_list_format = "(2)[black]{n} (30)[blue]{a} (33)[magenta]{t|f} (30)[white]{br} (5)[black]{l}"
#
# ### various settings #####
#
#
#  Note: Custom command that will be executed each
#  time song changes. Useful for notifications etc.
#
#  Attention: It doesn't support song format anymore.
#  Use `ncmpcpp --now-playing SONG_FORMAT` instead.
#
#execute_on_song_change = ""
#
#playlist_show_remaining_time = "no"
#
#playlist_shorten_total_times = "no"
#
playlist_separate_albums = "no"
#
playlist_display_mode = "columns" (classic/columns)
#
#browser_display_mode = "classic" (classic/columns)
#
#search_engine_display_mode = "classic" (classic/columns)
#
#playlist_editor_display_mode = "classic" (classic/columns)
#
#discard_colors_if_item_is_selected = "yes"
#
#incremental_seeking = "yes"
#
#seek_time = "1"
#
autocenter_mode = "yes"
#
#centered_cursor = "no"
#
#
#  Note: You can specify third character which will
#  be used to build 'empty' part of progressbar.
#
#progressbar_look = "=>"
progressbar_look = "███"

progressbar_boldness = "no"
#
#default_place_to_search_in = "database" (database/playlist)
#
#user_interface = "classic" (classic/alternative)
#
#media_library_left_column = "a" (possible values: a,y,g,c,p, legend above)
#
#default_find_mode = "wrapped" (wrapped/normal)
#
#default_space_mode = "add" (add/select)
#
#default_tag_editor_left_col = "albums" (albums/dirs)
#
#default_tag_editor_pattern = "%n - %t"
#
header_visibility = "no"
#
statusbar_visibility = "yes"
#
titles_visibility = "no"
#
header_text_scrolling = "no"
#
#fancy_scrolling = "yes"
#
#cyclic_scrolling = "no"
#
#lines_scrolled = "2"
#
#follow_now_playing_lyrics = "no"
#
#fetch_lyrics_for_current_song_in_background = "no"
#
#store_lyrics_in_song_dir = "no"
#
#
#  Note: If you set this variable, ncmpcpp will try to
#  get info from last.fm in language you set and if it
#  fails, it will fall back to english. Otherwise it will
#  use english the first time.
#
#  Note: Language has to be expressed as an ISO 639 alpha-2 code.
#
#lastfm_preferred_language = ""
#
#ncmpc_like_songs_adding = "no" (enabled - add/remove, disabled - always add)
#
#show_hidden_files_in_local_browser = "no"
#
#display_screens_numbers_on_start = "yes"
#
#
#  How shall key_screen_switcher work?
#
#  - "previous" - switch between current and last used screen
#  - "sequence: 2 -> 9 -> 5" - switch between given sequence of screens.
#
#  Screen numbers you can use after 'sequence' keyword are:
#
#  - 1 - help
#  - 2 - playlist
#  - 3 - browser
#  - 4 - search engine
#  - 5 - media library
#  - 6 - playlist editor
#  - 7 - tag editor
#  - 8 - outputs
#  - 9 - visualizer
#  - 10 - clock
#
#  As you can see, above example will switch between
#  playlist, visualizer and media library screens.
#
#screen_switcher_mode = "sequence: 2 -> 3"
#
#
#  Default width of locked screen (in %).
#  Acceptable values are from 20 to 80.
#
#
#locked_screen_width_part = "50"
#
#ask_for_locked_screen_width_part = "yes"
#
#
#  Note: You can define startup screen for ncmpcpp
#  by choosing screen number from the list above.
#
# startup_screen = "2"
#
jump_to_now_playing_song_at_start = "yes"
#
#ask_before_clearing_main_playlist = "no"
#
#clock_display_seconds = "no"
#
#display_volume_level = "yes"
#
#display_bitrate = "no"
#
#display_remaining_time = "no"
#
#regular_expressions = "basic" (basic/extended)
#
#
#  Note: If below is enabled, ncmpcpp will ignore leading
#  "The" word while sorting items in browser, tags in
#  media library, etc.
#
#ignore_leading_the = "no"
#
#block_search_constraints_change_if_items_found = "yes"
#
#mouse_support = "yes"
#
#mouse_list_scroll_whole_page = "yes"
#
empty_tag_marker = ""
#
#tag_editor_extended_numeration = "no"
#
#media_library_display_date = "yes"
#
#media_library_display_empty_tag = "yes"
#
#media_library_disable_two_column_mode = "no"
#
#enable_window_title = "yes"
#
#
#  Note: You can choose default search mode for search
#  engine. Available modes are:
#
#  - 1 - use mpd built-in searching (no regexes, pattern matching)
#  - 2 - use ncmpcpp searching (pattern matching with support for regexes,
#        but if your mpd is on a remote machine, downloading big database
#        to process it can take a while
#  - 3 - match only exact values (this mode uses mpd function for searching
#        in database and local one for searching in current playlist)
#
#
#search_engine_default_search_mode = "1"
#
#
#  Note: Below variables can allow you to physically
#  remove files and directories from your hdd using
#  ncmpcpp's browser screen.
#
#
#allow_physical_files_deletion = "no"
#
#allow_physical_directories_deletion = "no"
#
#external_editor = ""
#
#use_console_editor = "no" (set to yes, if your editor is console app)
#
# ### colors definitions #####
#
#colors_enabled = "yes"
#
#empty_tag_color = "cyan"
#
#header_window_color = "default"
#
#volume_color = "default"
#
#state_line_color = "default"
#
#state_flags_color = "default"
#
#main_window_color = "yellow"
#
#color1 = "white"
#
#color2 = "green"
#
#main_window_highlight_color = "yellow"
#
progressbar_color = "black"
progressbar_elapsed_color = "blue"
#
#statusbar_color = "default"
#
#alternative_ui_separator_color = "black"
#
#active_column_color = "red"
#
#visualizer_color = "yellow"
#
#window_border_color = "green"
#
#active_window_border = "red"
#