Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

ESP32 Can't find wifi #19

Open
lhy741059930 opened this issue May 25, 2022 · 1 comment
Open

ESP32 Can't find wifi #19

lhy741059930 opened this issue May 25, 2022 · 1 comment

Comments

@lhy741059930
Copy link

ESP32 Can't find wifi
serial port pint:

rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff0018,len:4
load:0x3fff001c,len:1108
load:0x40078000,len:10944
load:0x40080400,len:6388
entry 0x400806b4
Config version: init
Config size: 357
Wrong config version. Applying defaults.
[iwcAll]
|-- [iwcSys]
| |-- 'iwcThingName' with value: 'MrDIYNotifier-c4286f24'
| |-- 'iwcApPassword' with value:
| |-- [iwcWifi0]
| | |-- 'iwcWifiSsid' with value: ''
| | -- 'iwcWifiPassword' with value:
| -- 'iwcApTimeout' with value: '30'
|-- [iwcCustom]
| |-- [mqttgroup]
| | |-- 'mqttServer' with value: ''
| | |-- 'mqttUser' with value: ''
| | |-- 'mqttPass' with value:
| | -- 'mqttTopic (without / at the end)' with value: ''
| -- [soundgroup]
| |-- 'Sound_output' with value: ''
| |-- 'Sound_Volume' with value: '0.5'
| |-- 'samVoice :' with value: ''
| -- 'GoogleTTSvoice' with value: ''
-- [hidden]

Using No DAC output on ESP32, audio output on pins
speaker L & R -> GPIO22
Don't try and drive the speaker pins can't give enough current to drive even a headphone well and you may end up damaging your device
SkipApStartup is requested, but either no WiFi was set up, or configButton was pressed.
AP password was not set in configuration
State changing from: 0 to 1

Brownout detector was triggered

@eokgnah
Copy link

eokgnah commented May 19, 2023

brownout suggests a weak powersource. try a beefier 5v power brick.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

2 participants