Optoma UHD51

[derBonsaii]

Hey :)

I'm not able to connect my Optoma with this adapter on ioBroker.
The Beamer supports PJLink, i already testet it and i can controll it with PJLinkTEST4PJ.
I also already checked my settings in the adapter.

May you know what the problem is and how I can solve it?

Thank you

[oberstel]

Pls check network connectivity from ioBroker to projector using telnet (you may have to install telnet first).
telnet [ip address] [port]
In my case:
telnet 192.168.1.13 4352

You should see something like „Connected to [ip address]“ with a response code „PJLINK 0“.

If you are getting “unable to connect...” within <1 sec, ioBroker is not able to reach the device. Check network cable and IP address (or IP routing).

If you see „Trying...“ for a long time (>30 sec), followed by „unable to connect...“, you may using a wrong TCP port. Check TCP port in projector setup.

If connectivity is given, but the projector not responding to something like „power=1“, please provide some log files from ioBroker.

[derBonsaii]

Installed Telnet on my OS (Ubuntu). I'm not able to install it on ioBroker as I get an Error (Can't install https://github.com/ioBroker/ioBroker.telnet/tarball/master: Missing package name)

Using Telnet on Ubuntu, I'm getting "Connected to 192.168.1.9" and then „PJLINK 0“.
After that, nothing happens, even when I start the Beamer.

Perhaps it's easyier to explain in German ;)