diff --git a/examples/WebClient_DnsClient/WebClient_DnsClient.ino b/examples/WebClient_DnsClient/WebClient_DnsClient.ino
new file mode 100644
index 0000000..c8ac802
--- /dev/null
+++ b/examples/WebClient_DnsClient/WebClient_DnsClient.ino
@@ -0,0 +1,94 @@
+/*
+ *  Here's an Arduino uIP demo which shows you how to:
+ *   - acquire network configuration via DHCP
+ *   - perform a DNS request and save the resulting IP in
+ *     a IPAddress object
+ *   - perform a HTTP GET request against a remote server
+ *     (a Phant.io server in this example)
+ *   - save a bit of memory by using a macro around PROGMEM
+ *
+ * ENC28J60 wiring on ATmega328P based boards:
+ *  - SCK -> 13
+ *  - SO  -> 12
+ *  - SI  -> 11
+ *  - CS  -> 10
+ *   
+ *  by Lorenzo Cafaro (lorenzo@ibisco.net)
+ *
+ */
+
+#include <UIPEthernet.h>
+#include <Dns.h>
+
+// See: https://www.arduino.cc/en/Reference/PROGMEM
+#define PGMprintln(x) println(F(x))
+#define PGMprint(x) print(F(x))
+
+// MAC address configuration
+const uint8_t mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };
+
+// Destination host and port
+const char dsthost[] = "data.sparkfun.com";
+const uint16_t dstport = 80;
+
+// Our three main objects
+EthernetClient client;
+DNSClient DNSclient;
+IPAddress dstip;
+
+void setup() {
+  Serial.begin(9600);
+
+  // Initializing Ethernet
+  Serial.PGMprintln("Initializing Ethernet, waiting for DHCP...");
+  Ethernet.begin(mac);
+  Serial.PGMprint("IP: ");
+  Serial.println(Ethernet.localIP());
+  Serial.PGMprint("Subnet mask: ");
+  Serial.println(Ethernet.subnetMask());
+  Serial.PGMprint("Gateway: ");
+  Serial.println(Ethernet.gatewayIP());
+  Serial.PGMprint("DNS: ");
+  Serial.println(Ethernet.dnsServerIP());
+
+  // Initializing DNS
+  Serial.PGMprintln("Initializing DNS client...");
+  DNSclient.begin(Ethernet.dnsServerIP());
+  if (DNSclient.getHostByName(dsthost, dstip)) {
+    Serial.PGMprint("Resolved remote host to: ");
+    Serial.println(dstip);
+  } else {
+    Serial.PGMprintln("Error: could not resolve remote host.");
+  }
+}
+
+void loop() {
+  // Perform your sensor readings here
+  uint16_t value = analogRead(A0);
+  Serial.PGMprint("Sending value=");
+  Serial.print(value);
+  
+  // Connecting to the remote host
+  if (client.connect(dstip, dstport)) {
+
+    // Prepare the buffers
+    char getbuf[96] = {0};
+    char hostbuf[32] = {0};
+    sprintf(getbuf, "GET /input/PUBLIC_KEY?private_key=PRIVATE_KEY&value=%d", value);
+    sprintf(hostbuf, "\n Host: %s\n\n", dsthost);
+
+    // Send the data
+    client.print(getbuf);
+    client.print(hostbuf);
+
+    // Disconnect
+    client.stop();
+
+    Serial.PGMprintln("... sent!");
+
+  } else {
+    Serial.PGMprintln("... client connection failed!");
+  }
+
+  delay(5000);
+}