PWM_StepperControl.ino

/****************************************************************************************************************************
  PWM_StepperControl.ino
  For nRF52-based boards usinghardware-based PWM with Adafruit_nRF52_Arduino core
  Written by Khoi Hoang

  Built by Khoi Hoang https://github.com/khoih-prog/nRF52_PWM
  Licensed under MIT license

  Credits of Paul van Dinther (https://github.com/dinther). Check https://github.com/khoih-prog/RP2040_PWM/issues/16
*****************************************************************************************************************************/

// Use with Stepper-Motor driver, such as TMC2209

#define _PWM_LOGLEVEL_       4

// Select false to use PWM
#define USING_TIMER       false   //true

#include "nRF52_PWM.h"

// OK for Feather_nRF52840_Express   (5, 6, 9-13, 14-21/A0-A7, etc.)
// OK for ItsyBitsy_nRF52840_Express (5, 7, 9-13, 14-20/A0-A6, etc.)

#define STEP_PIN      5
#define DIR_PIN       9

nRF52_PWM* stepper;

void setSpeed(int speed)
{
  if (speed == 0)
  {
    // Use DC = 0 to stop stepper
    stepper->setPWM(STEP_PIN, 500, 0);
  }
  else
  {
    //  Set the frequency of the PWM output and a duty cycle of 50%
    digitalWrite(DIR_PIN, (speed < 0));
    stepper->setPWM(STEP_PIN, abs(speed), 50);
  }
}

void setup() 
{
  pinMode(DIR_PIN, OUTPUT);
  
  Serial.begin(115200);

  while (!Serial && millis() < 5000);

  delay(100);

  Serial.print(F("\nStarting PWM_StepperControl on "));
  Serial.println(BOARD_NAME);
  Serial.println(NRF52_PWM_VERSION);
  
  // Create PWM object and passed just a random frequency of 500
  // The duty cycle is how you turn the motor on and off
  stepper = new nRF52_PWM(STEP_PIN, 500, 0);
}

void loop() 
{
  setSpeed(1000);
  delay(3000);

  // Stop before reversing
  setSpeed(0);
  delay(3000);

  // Reversing
  setSpeed(-500);
  delay(3000);

  // Stop before reversing
  setSpeed(0);
  delay(3000);
}