Victron Smartshunt

Jump to bottom Edit New page

Manos1966 edited this page May 10, 2024 · 6 revisions

SmartSHUNT is a choice under BATTERY (not under Victron):

Subsequently the PINOUT Configuration is put under BATTERY (not Victron).

Here is an example, if you have PIN 27 and 14 available on your ESP32. The picture below shows

where PIN 27 and PIN 14 should be connected to on the Victron Smartshunt
what you need to define in the PINOUT Configuration of the OpenDTUonBattery (black square)

SmartSHUN PIN MappingT