RF24_config.h

/*
 Copyright (C) 2011 J. Coliz <maniacbug@ymail.com>

 This program is free software; you can redistribute it and/or
 modify it under the terms of the GNU General Public License
 version 2 as published by the Free Software Foundation.

 Added Arduino Due support from https://github.com/mcrosson/
 */
 
 /* spaniakos <spaniakos@gmail.com>
  Added __ARDUINO_X86__ support
*/

#ifndef __RF24_CONFIG_H__
#define __RF24_CONFIG_H__

  /*** USER DEFINES:  ***/  
  //#define FAILURE_HANDLING
  //#define SERIAL_DEBUG
  //#define MINIMAL
  //#define SPI_UART  // Requires library from https://github.com/TMRh20/Sketches/tree/master/SPI_UART
  //#define SOFTSPI   // Requires library from https://github.com/greiman/DigitalIO
  /**********************/
  #define rf24_max(a,b) (a>b?a:b)
  #define rf24_min(a,b) (a<b?a:b)
  
#if (defined (__linux) || defined (linux)) && !defined (__ARDUINO_X86__)
  #define RF24_LINUX
  
  #include <stdint.h>
  #include <stdio.h>
  #include <time.h>
  #include <string.h>
  #include <sys/time.h>
  #include <stddef.h>
  #include "RPi/bcm2835.h"

  // GCC a Arduino Missing
  #define _BV(x) (1<<(x))
  #define pgm_read_word(p) (*(p))
  #define pgm_read_byte(p) (*(p))
  
  //typedef uint16_t prog_uint16_t;
  #define PSTR(x) (x)
  #define printf_P printf
  #define strlen_P strlen
  #define PROGMEM
  #define PRIPSTR "%s"

  #ifdef SERIAL_DEBUG
	#define IF_SERIAL_DEBUG(x) ({x;})
  #else
	#define IF_SERIAL_DEBUG(x)
	#if defined(RF24_TINY)
	  #define printf_P(...)
    #endif
  #endif
  
#else //Everything else

  #if ARDUINO < 100
	#include <WProgram.h>
  #else
	#include <Arduino.h>
  #endif

  #include <stddef.h>
  
 
  // Define _BV for non-Arduino platforms and for Arduino DUE
#if defined (ARDUINO) && !defined (__arm__) && !defined (__ARDUINO_X86__)
	#if defined(__AVR_ATtiny25__) || defined(__AVR_ATtiny45__) || defined(__AVR_ATtiny85__) || defined(__AVR_ATtiny24__) || defined(__AVR_ATtiny44__) || defined(__AVR_ATtiny84__)
		#define RF24_TINY
		#define _SPI SPI
	#else
      #if defined SPI_UART
		#include <SPI_UART.h>
		#define _SPI uspi
	  #elif defined SOFTSPI
	  // change these pins to your liking
      //
      const uint8_t SOFT_SPI_MISO_PIN = 16; 
      const uint8_t SOFT_SPI_MOSI_PIN = 15; 
      const uint8_t SOFT_SPI_SCK_PIN = 14;  
      const uint8_t SPI_MODE = 0;
      #define _SPI spi
      
	  #else	    
		#include <SPI.h>
		#define _SPI SPI
	  #endif
	#endif
#else
  #include <stdint.h>
  #include <stdio.h>
  #include <string.h>


 #if defined(__arm__) || defined (CORE_TEENSY) || defined (__ARDUINO_X86__)
   #include <SPI.h>
 #endif

 #if !defined(CORE_TEENSY)	
   #define _BV(x) (1<<(x))
   #if !defined(__arm__) && !defined (__ARDUINO_X86__)
     extern HardwareSPI SPI;
   #endif
 #else
    #define printf Serial.printf
 #endif

  #define _SPI SPI
#endif

  
  #ifdef SERIAL_DEBUG
	#define IF_SERIAL_DEBUG(x) ({x;})
  #else
	#define IF_SERIAL_DEBUG(x)
	#if defined(RF24_TINY)
	#define printf_P(...)
    #endif
  #endif
  
#if  defined (__ARDUINO_X86__)
	#define printf_P printf
	#define _BV(bit) (1<<(bit))
#endif
  
// Avoid spurious warnings
// Arduino DUE is arm and uses traditional PROGMEM constructs
#if 1
#if ! defined( NATIVE ) && defined( ARDUINO ) && ! defined(__arm__)  && ! defined( CORE_TEENSY3 )
#undef PROGMEM
#define PROGMEM __attribute__(( section(".progmem.data") ))
#undef PSTR
#define PSTR(s) (__extension__({static const char __c[] PROGMEM = (s); &__c[0];}))
#endif
#endif

// Progmem is Arduino-specific
// Arduino DUE is arm and does not include avr/pgmspace
#if defined(ARDUINO) && ! defined(__arm__) && !defined (__ARDUINO_X86__)
	#include <avr/pgmspace.h>
	#define PRIPSTR "%S"
#else
#if ! defined(ARDUINO) // This doesn't work on Arduino DUE
	typedef char const char;
#else // Fill in pgm_read_byte that is used, but missing from DUE
	#define pgm_read_byte(addr) (*(const unsigned char *)(addr))
#endif

#if !defined ( CORE_TEENSY )
	typedef uint16_t prog_uint16_t;
	#define PSTR(x) (x)
	#define printf_P printf
	#define strlen_P strlen
	#define PROGMEM
	#define pgm_read_word(p) (*(p))
#endif

	#define PRIPSTR "%s"

#endif

#endif //Defined Linux 


// ATTiny support code is from https://github.com/jscrane/RF24

#if defined(RF24_TINY)
#include <stdio.h>
#include <Arduino.h>
#include <avr/pgmspace.h>

#define SPI_CLOCK_DIV4 0x00
#define SPI_CLOCK_DIV16 0x01
#define SPI_CLOCK_DIV64 0x02
#define SPI_CLOCK_DIV128 0x03
#define SPI_CLOCK_DIV2 0x04
#define SPI_CLOCK_DIV8 0x05
#define SPI_CLOCK_DIV32 0x06
//#define SPI_CLOCK_DIV64 0x07

#define SPI_MODE0 0x00
#define SPI_MODE1 0x04
#define SPI_MODE2 0x08
#define SPI_MODE3 0x0C

#define SPI_MODE_MASK 0x0C  // CPOL = bit 3, CPHA = bit 2 on SPCR
#define SPI_CLOCK_MASK 0x03  // SPR1 = bit 1, SPR0 = bit 0 on SPCR
#define SPI_2XCLOCK_MASK 0x01  // SPI2X = bit 0 on SPSR



class SPIClass {
public:
  static byte transfer(byte _data);

  // SPI Configuration methods

  inline static void attachInterrupt();
  inline static void detachInterrupt(); // Default

  static void begin(); // Default
  static void end();

  static void setBitOrder(uint8_t);
  static void setDataMode(uint8_t);
  static void setClockDivider(uint8_t);
};
extern SPIClass SPI;

#endif //ATTiny
#endif // __RF24_CONFIG_H__