Rear camera CLIO V

[Kagehoshiii]

Hello everyone!

I recently bought a used Clio V, Intens model from April 2021. I had planned to activate some options, including the rear camera, using the latest version of ddt4all, the November 2021 database, and the ecu.zip file provided by Furtif.

However, I am encountering an issue: when I try to write to Navigation/Camera_System_config, the application crashes. Below is the error message and the logs after a scan. The scan indicates that the navigation file is missing. Upon checking the reference 5805_211206, it seems I have a recent ECU, Branch 2.

How can I activate the rear camera? Am I doing it correctly? I have already managed to activate some options via Navigation/Information System.

Thank you in advance for your help.

[Furtif]

is this #845 ?????

[Kagehoshiii]

yes this is it. I got the error as in the screenshot, then I tried again with the ECU.zip file but no change. I checked via the code that the file is loaded correctly

[Furtif]

yes this is it. I got the error as in the screenshot, then I tried again with the ECU.zip file but no change. I checked via the code that the file is loaded correctly

humm ok ... Clio V is not blocked by gateway ?

[Kagehoshiii]

yes, I think so. in any case I was able to activate other options. regarding the rear view camera, for activation, am I in the right place?

Edit :
if we connect directly to 2 PIN of the car radio, which is behind the glove box, we bypass the gateway and we can write. from the ODB socket, we can only read.
I was able to activate Android auto/CarPlay wirelessly like that.
Otherwise I tried with PyRen, in DDT mode, and I was able to write!!!!! except that it didn't change anything, I don't have the reversing camera activated... in I go to the parking assistance, I only have the rear radars.

[Furtif]

yes, I think so. in any case I was able to activate other options. regarding the rear view camera, for activation, am I in the right place?

Edit : if we connect directly to 2 PIN of the car radio, which is behind the glove box, we bypass the gateway and we can write. from the ODB socket, we can only read. I was able to activate Android auto/CarPlay wirelessly like that. Otherwise I tried with PyRen, in DDT mode, and I was able to write!!!!! except that it didn't change anything, I don't have the reversing camera activated... in I go to the parking assistance, I only have the rear radars.

i go move you problem to https://github.com/cedricp/ddt4all/discussions and please look some issues about clio V and gateway,

if is a bug python ok reopem issue

Note:

• I thinks if this bug happens it raise says (please unlock or bypass gateway before) go look in you picture up and implement it, if is possible.

[Furtif]

Test commit 9eae438

[Furtif]

Plaese try last commits thanks.

[Kagehoshiii]

Okay, I'll try today or tomorrow at the latest.
Thanks Furtif

[Furtif]

Okay, I'll try today or tomorrow at the latest. Thanks Furtif

tested ????

[Kagehoshiii]

Okay, I'll try today or tomorrow at the latest. Thanks Furtif

tested ????

I didn't have time this weekend... I might test this tonight.

[Kagehoshiii]

I tried with the fix but I have another error... finally just for the activation of the camera I used another tool. Thanks for your help!

[Furtif]

I tried with the fix but I have another error... finally just for the activation of the camera I used another tool. Thanks for your help!

message is showed in red in ddt4all window log ?

[Kagehoshiii]

I tried with the fix but I have another error... finally just for the activation of the camera I used another tool. Thanks for your help!

message is showed in red in ddt4all window log ?

No, only on VSCode, in the terminal. After that, ddt4all closed. Without VSCode, I only see the error in the CMD terminal but a few seconds. It closed at the same time as ddt4all

[Furtif]

@cedricp le key e mauvais doit avoir un try catch pareil en ecu.py et paramètres pareil mais j'ai pas se ecu pour test faudra le add en mode test demo peut être tas une idée de quel ecu il utilise ???

[Furtif]

Hello,
try last commits please.
thanks.

[Kagehoshiii]

I tried with the fix but I have another error... finally just for the activation of the camera I used another tool. Thanks for your help!

Hi! Did you use Pyren? Or another tool? Please let me know how you activated the camera?

Hi! I used PyRen yes. I bought this adapter on Aliexpress, with the camera.

[billigizer]

Hi, i bought the same camera from aliexpress. I've installed it but not managed to activate it yet. I'm using an autel device + 16+32 bypass cable. After i code the camera it says "command finished successfully" the screen turns black, restarts but no signs of activation. Could you be so kind to help me?
I have elm and ecu tweaker installed but have not usef them yet.

This is a clip from my car I've posted.

https://youtube.com/shorts/iD34406Vntg?si=NFyEe-T4Xz2QMNH4

[Alex-mtn]

I tried with the fix but I have another error... finally just for the activation of the camera I used another tool. Thanks for your help!

Hi! Did you use Pyren? Or another tool? Please let me know how you activated the camera?

Hi! I used PyRen yes. I bought this adapter on Aliexpress, with the camera.

Can you write the activation procedure in Pyren? I will be very grateful

[Kagehoshiii]

I tried with the fix but I have another error... finally just for the activation of the camera I used another tool. Thanks for your help!

Hi! Did you use Pyren? Or another tool? Please let me know how you activated the camera?

Hi! I used PyRen yes. I bought this adapter on Aliexpress, with the camera.

Can you write the activation procedure in Pyren? I will be very grateful

It was 2 months ago, I don't remember exactly.
I already had to use PyRen because ddt4all crashed when I wanted to write in Navigation/Camera_System_config (maybe not anymore) otherwise for everything else it worked perfectly!
So in addition to PyRen you need a database, I think I had the one from 07.2021, but before that it should work. then you need in Navigation/Camera_System_config, you have to configure like the photo sent just before. there is a last setting to make on the same page, but lower down, to activate the guide lines and that they are not reversed.
I would have to relaunch it to see exactly the manipulation but I will not be able to before Monday

[Alex-mtn]

It was 2 months ago, I don't remember exactly. I already had to use PyRen because ddt4all crashed when I wanted to write in Navigation/Camera_System_config (maybe not anymore) otherwise for everything else it worked perfectly! So in addition to PyRen you need a database, I think I had the one from 07.2021, but before that it should work. then you need in Navigation/Camera_System_config, you have to configure like the photo sent just before. there is a last setting to make on the same page, but lower down, to activate the guide lines and that they are not reversed. I would have to relaunch it to see exactly the manipulation but I will not be able to before Monday

I successfully connected wireless carplay via ddt4all, but I can’t configure the camera in Navigation/Camera_System_config. I have successfully connected Pyren with the current database, but I don't know exactly what to do next. I assume that I need to go to the Navigation ECU and change some camera parameter via extended command set.

[Kagehoshiii]

It was 2 months ago, I don't remember exactly. I already had to use PyRen because ddt4all crashed when I wanted to write in Navigation/Camera_System_config (maybe not anymore) otherwise for everything else it worked perfectly! So in addition to PyRen you need a database, I think I had the one from 07.2021, but before that it should work. then you need in Navigation/Camera_System_config, you have to configure like the photo sent just before. there is a last setting to make on the same page, but lower down, to activate the guide lines and that they are not reversed. I would have to relaunch it to see exactly the manipulation but I will not be able to before Monday

I successfully connected wireless carplay via ddt4all, but I can’t configure the camera in Navigation/Camera_System_config. I have successfully connected Pyren with the current database, but I don't know exactly what to do next. I assume that I need to go to the Navigation ECU and change some camera parameter via extended command set.

That's right! To activate the rear camera I configured it as in this photo. However, it was difficult, I had to play with several settings so that it finally worked. At times I didn't have the camera (just radars) then the camera area was displayed but without an image. And eventually it worked

[Alex-mtn]

That's right! To activate the rear camera I configured it as in this photo. However, it was difficult, I had to play with several settings so that it finally worked. At times I didn't have the camera (just radars) then the camera area was displayed but without an image. And eventually it worked !

But this photo is from ddt4all, in ddt4all I get the message "please unlock or bypass gateway before" and I can't do it. Do you do this in ddt4all? I'm totally lost

[Furtif]

That's right! To activate the rear camera I configured it as in this photo. However, it was difficult, I had to play with several settings so that it finally worked. At times I didn't have the camera (just radars) then the camera area was displayed but without an image. And eventually it worked !

But this photo is from ddt4all, in ddt4all I get the message "please unlock or bypass gateway before" and I can't do it. Do you do this in ddt4all? I'm totally lost

is last commits ?

[Alex-mtn]

That's right! To activate the rear camera I configured it as in this photo. However, it was difficult, I had to play with several settings so that it finally worked. At times I didn't have the camera (just radars) then the camera area was displayed but without an image. And eventually it worked !

But this photo is from ddt4all, in ddt4all I get the message "please unlock or bypass gateway before" and I can't do it. Do you do this in ddt4all? I'm totally lost

is last commits ?

yes

[Kagehoshiii]

That's right! To activate the rear camera I configured it as in this photo. However, it was difficult, I had to play with several settings so that it finally worked. At times I didn't have the camera (just radars) then the camera area was displayed but without an image. And eventually it worked !

But this photo is from ddt4all, in ddt4all I get the message "please unlock or bypass gateway before" and I can't do it. Do you do this in ddt4all? I'm totally lost

From PyRen you have the same view

[Alex-mtn]

That's right! To activate the rear camera I configured it as in this photo. However, it was difficult, I had to play with several settings so that it finally worked. At times I didn't have the camera (just radars) then the camera area was displayed but without an image. And eventually it worked !

But this photo is from ddt4all, in ddt4all I get the message "please unlock or bypass gateway before" and I can't do it. Do you do this in ddt4all? I'm totally lost

is last commits ?

yes

[Alex-mtn]

That's right! To activate the rear camera I configured it as in this photo. However, it was difficult, I had to play with several settings so that it finally worked. At times I didn't have the camera (just radars) then the camera area was displayed but without an image. And eventually it worked !

But this photo is from ddt4all, in ddt4all I get the message "please unlock or bypass gateway before" and I can't do it. Do you do this in ddt4all? I'm totally lost

From PyRen you have the same view

wow, I thought in pyren we only work in the terminal. This is DDT mode?

[Furtif]

That's right! To activate the rear camera I configured it as in this photo. However, it was difficult, I had to play with several settings so that it finally worked. At times I didn't have the camera (just radars) then the camera area was displayed but without an image. And eventually it worked !

But this photo is from ddt4all, in ddt4all I get the message "please unlock or bypass gateway before" and I can't do it. Do you do this in ddt4all? I'm totally lost

is last commits ?

yes

seen ok before it get error

[Furtif]

is the zoe electric or clio v and more recent models need baypass Gateway

[Alex-mtn]

is the zoe electric or clio v and more recent models need baypass Gateway

yes, this is a 2020 Zoe with CGW. I connected directly to the navigation ECU and have already successfully changed many parameters... except the camera

[Furtif]

is the zoe electric or clio v and more recent models need baypass Gateway

yes, this is a 2020 Zoe with CGW. I connected directly to the navigation ECU and have already successfully changed many parameters... except the camera