flattened.sol

// SPDX-License-Identifier: MIT
// Sources flattened with hardhat v2.3.0 https://hardhat.org

// File @openzeppelin/contracts/token/ERC20/IERC20.sol@v4.1.0



pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}


// File @openzeppelin/contracts/utils/Context.sol@v4.1.0



pragma solidity ^0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}


// File @openzeppelin/contracts/access/Ownable.sol@v4.1.0



pragma solidity ^0.8.0;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}


// File @openzeppelin/contracts/utils/math/SafeMath.sol@v4.1.0



pragma solidity ^0.8.0;

// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.

/**
 * @dev Wrappers over Solidity's arithmetic operations.
 *
 * NOTE: `SafeMath` is no longer needed starting with Solidity 0.8. The compiler
 * now has built in overflow checking.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        return a + b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        return a * b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator.
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        unchecked {
            require(b <= a, errorMessage);
            return a - b;
        }
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a / b;
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a % b;
        }
    }
}


// File contracts/libraries/Math.sol



pragma solidity ^0.8.4;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
  /**
   * @dev Returns the largest of two numbers.
   */
  function max(uint256 a, uint256 b) internal pure returns (uint256) {
    return a >= b ? a : b;
  }

  /**
   * @dev Returns the smallest of two numbers.
   */
  function min(uint256 a, uint256 b) internal pure returns (uint256) {
    return a < b ? a : b;
  }

  /**
   * @dev Returns the average of two numbers. The result is rounded towards
   * zero.
   */
  function average(uint256 a, uint256 b) internal pure returns (uint256) {
    // (a + b) / 2 can overflow, so we distribute.
    return (a / 2) + (b / 2) + (((a % 2) + (b % 2)) / 2);
  }

  /**
   * @dev Returns the ceiling of the division of two numbers.
   *
   * This differs from standard division with `/` in that it rounds up instead
   * of rounding down.
   */
  function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
    // (a + b - 1) / b can overflow on addition, so we distribute.
    return a / b + (a % b == 0 ? 0 : 1);
  }
}


// File contracts/HedgePlus.sol

// 
pragma solidity 0.8.4;




contract HedgePlus is Context, IERC20, Ownable {
  using Math for uint256;
  using SafeMath for uint256;

  uint256 public taxPercentage = 200;

  uint256 private constant BP_DIVISOR = 10000;

  mapping(address => uint256) private _balances;
  mapping(address => mapping(address => uint256)) private _allowances;
  //mapping(address => bool) private _isBlacklisted;

  address private _marketMakingAddress;
  uint256 private _totalSupply;
  string private _name;
  string private _symbol;

  constructor(address marketMakingAddress_) {
    require(marketMakingAddress_ != address(0), "Invalid market wallet");

    _totalSupply = 21 * 1000 * 1000 ether;
    _marketMakingAddress = marketMakingAddress_;
    _name = "HedgePlus";
    _symbol = "HPLUS";

    _mint(_msgSender(), _totalSupply);
  }

  function name() public view returns (string memory) {
    return _name;
  }

  function symbol() public view returns (string memory) {
    return _symbol;
  }

  function decimals() public pure returns (uint8) {
    return 18;
  }

  function totalSupply() public view override returns (uint256) {
    return _totalSupply;
  }

  function balanceOf(address account) public view override returns (uint256) {
    return _balances[account];
  }

  function transfer(address recipient, uint256 amount)
    public
    override
    returns (bool)
  {
    _transfer(_msgSender(), recipient, amount);
    return true;
  }

  function allowance(address owner, address spender)
    public
    view
    override
    returns (uint256)
  {
    return _allowances[owner][spender];
  }

  function approve(address spender, uint256 amount)
    public
    override
    returns (bool)
  {
    _approve(_msgSender(), spender, amount);
    return true;
  }

  function transferFrom(
    address sender,
    address recipient,
    uint256 amount
  ) public override returns (bool) {
    _transfer(sender, recipient, amount);

    uint256 currentAllowance = _allowances[sender][_msgSender()];
    require(currentAllowance >= amount, "Transfer amount exceeds allowance");
    unchecked {_approve(sender, _msgSender(), currentAllowance - amount);}

    return true;
  }

  function increaseAllowance(address spender, uint256 addedValue)
    public
    returns (bool)
  {
    _approve(
      _msgSender(),
      spender,
      _allowances[_msgSender()][spender] + addedValue
    );
    return true;
  }

  function decreaseAllowance(address spender, uint256 subtractedValue)
    public
    virtual
    returns (bool)
  {
    uint256 currentAllowance = _allowances[_msgSender()][spender];
    require(
      currentAllowance >= subtractedValue,
      "Decreased allowance below zero"
    );
    unchecked {
      _approve(_msgSender(), spender, currentAllowance - subtractedValue);
    }

    return true;
  }

  function burn(uint256 _amount) external returns (bool) {
    _burn(_msgSender(), _amount);
    return true;
  }

  function burnFrom(address _spender, uint256 _amount) external returns (bool) {
    uint256 senderAllowance = _allowances[_spender][_msgSender()];
    require(senderAllowance >= _amount, "Burn amount exceeds allowance");

    _allowances[_spender][_msgSender()] = senderAllowance.sub(_amount);
    _burn(_msgSender(), _amount);
    return true;
  }

  function setMarketMakingAddress(address marketMakingAddress_)
    external
    onlyOwner
    returns (bool)
  {
    require(marketMakingAddress_ != address(0), "Invalid address");
    _marketMakingAddress = marketMakingAddress_;
    return true;
  }


  /**
   * update the tax percentage
   */
  function setTaxPercentage(uint256 _value) external onlyOwner {
    taxPercentage = _value;
  }


  function _calculateTaxAmount(uint256 amount) internal view returns (uint256) {
    uint256 roundValue = amount.ceilDiv(taxPercentage);
    uint256 taxAmout = roundValue.mul(taxPercentage).div(BP_DIVISOR);

    return taxAmout;
  }

  function _mint(address account, uint256 amount) internal {
    require(account != address(0), "Invalid address");

    _balances[account] = _balances[account].add(amount);
    emit Transfer(address(0), account, amount);
  }

  function _transfer(
    address sender,
    address recipient,
    uint256 amount
  ) internal {
    require(sender != address(0), "Transfer from the zero address");
    require(recipient != address(0), "Transfer to the zero address");
    require(amount > 0, "Invalid transfer amount");

    uint256 senderBalancee = balanceOf(sender);
    require(senderBalancee >= amount, "Transfer amount exceeds balance");

    _beforeTokenTransfer(sender, recipient, amount);

    uint256 taxAmount = _calculateTaxAmount(amount);
    uint256 tokensToTransfer = amount.sub(taxAmount);
    uint256 tokensToBurn = taxAmount.div(2);

    unchecked {_balances[sender] = senderBalancee - amount;}
    _balances[recipient] += tokensToTransfer;

    _balances[_marketMakingAddress] += tokensToBurn;
    _totalSupply -= tokensToBurn;

    emit Transfer(sender, recipient, tokensToTransfer);
    emit Transfer(sender, address(0), tokensToBurn);
  }

  function _approve(
    address owner,
    address spender,
    uint256 amount
  ) internal virtual {
    require(owner != address(0), "Approve from the zero address");
    require(spender != address(0), "Approve to the zero address");

    _allowances[owner][spender] = amount;
    emit Approval(owner, spender, amount);
  }



  function _burn(address account, uint256 amount) internal {
    
    require(account != address(0), "Burn from the zero address");
    require(amount > 0, "Invalid amount");

    _beforeTokenTransfer(account, address(0), amount);

    uint256 accountBalance = _balances[account];
    require(accountBalance >= amount, "Burn amount exceeds balance");
    unchecked {_balances[account] = accountBalance - amount;}
    _totalSupply -= amount;

    emit Transfer(account, address(0), amount);
  }

  function _beforeTokenTransfer(
    address from,
    address to,
    uint256 amount
  ) internal virtual {}
}