BoardConfig.mk

#
# Copyright 2017 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

# This contains the module build definitions for the hardware-specific
# components for this device.
#
# As much as possible, those components should be built unconditionally,
# with device-specific names to avoid collisions, to avoid device-specific
# bitrot and build breakages. Building a component unconditionally does
# *not* include it on all devices, so it is safe even with hardware-specific
# components.

# For building with minimal manifest
ALLOW_MISSING_DEPENDENCIES := true

# Architecture
TARGET_ARCH := arm64
TARGET_ARCH_VARIANT := armv8-a
TARGET_CPU_ABI := arm64-v8a
TARGET_CPU_ABI2 :=
TARGET_CPU_VARIANT := generic

TARGET_2ND_ARCH := arm
TARGET_2ND_ARCH_VARIANT := armv7-a-neon
TARGET_2ND_CPU_ABI := armeabi-v7a
TARGET_2ND_CPU_ABI2 := armeabi
TARGET_2ND_CPU_VARIANT := generic
TARGET_BOARD_SUFFIX := _64
TARGET_USES_64_BIT_BINDER := true

TARGET_SUPPORTS_64_BIT_APPS := true
ENABLE_CPUSETS := true
ENABLE_SCHEDBOOST := true

# Bootloader
TARGET_BOOTLOADER_BOARD_NAME := $(PRODUCT_PLATFORM)
TARGET_USES_UEFI := true

# Kernel
BOARD_KERNEL_CMDLINE := androidboot.hardware=qcom
BOARD_KERNEL_CMDLINE += androidboot.memcg=1
BOARD_KERNEL_CMDLINE += lpm_levels.sleep_disabled=1
BOARD_KERNEL_CMDLINE += video=vfb:640x400,bpp=32,memsize=3072000
BOARD_KERNEL_CMDLINE += msm_rtb.filter=0x237
BOARD_KERNEL_CMDLINE += service_locator.enable=1
BOARD_KERNEL_CMDLINE += swiotlb=2048
BOARD_KERNEL_CMDLINE += firmware_class.path=/vendor/firmware_mnt/image
BOARD_KERNEL_CMDLINE += loop.max_part=7
BOARD_KERNEL_CMDLINE += androidboot.usbcontroller=a600000.dwc3
BOARD_KERNEL_CMDLINE += buildproduct=griffin
BOARD_KERNEL_CMDLINE += buildid=KUMANO-1.2.0-DOCOMO-211005-2055
BOARD_KERNEL_CMDLINE += panic_on_err=1
BOARD_KERNEL_CMDLINE += zram.backend=z3fold
BOARD_KERNEL_CMDLINE += androidboot.selinux=permissive
#BOARD_KERNEL_CMDLINE += androidboot.fastboot=1

TARGET_PREBUILT_KERNEL := $(DEVICE_PATH)/prebuilt/$(PRODUCT_RELEASE_NAME)/Image.gz
TARGET_PREBUILT_DTB := $(DEVICE_PATH)/prebuilt/$(PRODUCT_RELEASE_NAME)/dtb.img
TARGET_RECOVERY_WIPE := $(DEVICE_PATH)/recovery.wipe
BOARD_BOOTIMG_HEADER_VERSION := 2
BOARD_KERNEL_BASE := 0x00000000
BOARD_KERNEL_PAGESIZE := 4096
BOARD_RAMDISK_OFFSET := 0x01000000
BOARD_KERNEL_TAGS_OFFSET := 0x00000100
BOARD_FLASH_BLOCK_SIZE := 262144
BOARD_MKBOOTIMG_ARGS += --ramdisk_offset $(BOARD_RAMDISK_OFFSET)
BOARD_MKBOOTIMG_ARGS += --tags_offset $(BOARD_KERNEL_TAGS_OFFSET)
BOARD_MKBOOTIMG_ARGS += --dtb $(TARGET_PREBUILT_DTB)
BOARD_MKBOOTIMG_ARGS += --header_version $(BOARD_BOOTIMG_HEADER_VERSION)
BOARD_KERNEL_IMAGE_NAME := Image.gz
TARGET_KERNEL_ARCH := arm64
TARGET_KERNEL_HEADER_ARCH := arm64
TARGET_KERNEL_SOURCE := kernel/sony/griffin
TARGET_KERNEL_CONFIG := griffin_defconfig

# Platform
TARGET_BOARD_PLATFORM := $(TARGET_BOOTLOADER_BOARD_NAME)
TARGET_BOARD_PLATFORM_GPU := qcom-adreno640
TARGET_USES_HARDWARE_QCOM_BOOTCTRL := true
QCOM_BOARD_PLATFORMS += $(TARGET_BOARD_PLATFORM)

# Partitions
BOARD_HAS_LARGE_FILESYSTEM := true
BOARD_BOOTIMAGE_PARTITION_SIZE := 0x04000000
BOARD_RECOVERYIMAGE_PARTITION_SIZE := 67108864
BOARD_SYSTEMIMAGE_PARTITION_SIZE := 4362076160
BOARD_SYSTEMIMAGE_PARTITION_TYPE := ext4
BOARD_USERDATAIMAGE_PARTITION_SIZE := 114994094080
BOARD_USERDATAIMAGE_FILE_SYSTEM_TYPE := ext4
BOARD_VENDORIMAGE_PARTITION_SIZE := 1073741824
BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE := ext4
BOARD_ODMIMAGE_PARTITION_SIZE := 419430400
TARGET_USERIMAGES_USE_EXT4 := true
TARGET_USERIMAGES_USE_F2FS := true

# Filesystem
BOARD_BUILD_SYSTEM_ROOT_IMAGE := true
PRODUCT_ENFORCE_VINTF_MANIFEST := true

# Workaround for error copying vendor files to recovery ramdisk
TARGET_COPY_OUT_VENDOR := vendor

# Root
BOARD_ROOT_EXTRA_SYMLINKS += /vendor/dsp:/dsp
BOARD_ROOT_EXTRA_SYMLINKS += /vendor/bt_firmware:/bluetooth
BOARD_ROOT_EXTRA_SYMLINKS += /vendor/firmware_mnt:/firmware
BOARD_ROOT_EXTRA_SYMLINKS += /mnt/vendor/persist:/persist

# AVB
BOARD_AVB_ENABLE := true
BOARD_AVB_ROLLBACK_INDEX := $(PLATFORM_SECURITY_PATCH_TIMESTAMP)
BOARD_AVB_MAKE_VBMETA_IMAGE_ARGS += --set_hashtree_disabled_flag
BOARD_AVB_MAKE_VBMETA_IMAGE_ARGS += --flags 2
BOARD_AVB_RECOVERY_KEY_PATH := external/avb/test/data/testkey_rsa2048.pem
BOARD_AVB_RECOVERY_ALGORITHM := SHA256_RSA2048
BOARD_AVB_RECOVERY_ROLLBACK_INDEX := 1
BOARD_AVB_RECOVERY_ROLLBACK_INDEX_LOCATION := 1

# Encryption
PLATFORM_VERSION := 99.87.36
PLATFORM_VERSION_LAST_STABLE := $(PLATFORM_VERSION)
TW_INCLUDE_CRYPTO := true
TW_INCLUDE_CRYPTO_FBE := true
BOARD_USES_QCOM_HARDWARE := true
BOARD_USES_METADATA_PARTITION := true
BOARD_USES_QCOM_FBE_DECRYPTION := true
PLATFORM_SECURITY_PATCH := 2127-12-31
VENDOR_SECURITY_PATCH := 2127-12-31

# Config
BOARD_SUPPRESS_SECURE_ERASE := true
BUILD_BROKEN_DUP_RULES := true
BUILD_BROKEN_PREBUILT_ELF_FILES := true
BUILD_BROKEN_USES_NETWORK := true
TARGET_SYSTEM_PROP += $(DEVICE_PATH)/system.prop
TARGET_KEYMASTER_WAIT_FOR_QSEE := true
TW_PREPARE_DATA_MEDIA_EARLY := true

# Qualcomm support
TARGET_USES_QCOM_BSP := true
HAVE_SYNAPTICS_I2C_RMI4_FW_UPGRADE   := true
USE_DEVICE_SPECIFIC_QCOM_PROPRIETARY := true
TW_NEW_ION_HEAP := true
TARGET_USES_NEW_ION_API := true

# Recovery
BUILD_BROKEN_ELF_PREBUILT_PRODUCT_COPY_FILES := true
BOARD_HAS_LARGE_FILESYSTEM := true
BOARD_HAS_NO_SELECT_BUTTON := true
BOARD_USES_RECOVERY_AS_BOOT := true
TARGET_NO_RECOVERY := true
TARGET_OTA_ASSERT_DEVICE := griffin
TARGET_RECOVERY_DEVICE_MODULES += \
    libion \
    libxml2 \
    android.hardware.boot@1.0 \
    libandroidicu

RECOVERY_LIBRARY_SOURCE_FILES += \
    $(TARGET_OUT_SHARED_LIBRARIES)/libion.so \
    $(TARGET_OUT_SHARED_LIBRARIES)/libxml2.so

TARGET_RECOVERY_QCOM_RTC_FIX := true
TARGET_RECOVERY_FSTAB := $(DEVICE_PATH)/recovery.fstab
DEVICE_MANIFEST_FILE := $(DEVICE_PATH)/recovery/root/vendor/etc/vintf/manifest.xml
DEVICE_MATRIX_FILE := $(DEVICE_PATH)/recovery/root/vendor/etc/vintf/compatibility_matrix.xml

# Use mke2fs to create ext4 images
TARGET_USES_MKE2FS := true

# TWRP specific build flags
TW_THEME := portrait_hdpi
TW_INPUT_BLACKLIST := "hbtp_vm"
RECOVERY_SDCARD_ON_DATA := true
TW_BRIGHTNESS_PATH := "/sys/class/backlight/panel0-backlight/brightness"
TW_EXCLUDE_DEFAULT_USB_INIT := true
TW_EXTRA_LANGUAGES := true
TW_INCLUDE_NTFS_3G := true
TW_INCLUDE_REPACKTOOLS := true
TW_INCLUDE_RESETPROP := true
TW_INCLUDE_LIBRESETPROP := true
TW_NO_FLASH_CURRENT_TWRP := true
TW_DEFAULT_BRIGHTNESS := 300
TW_NO_SCREEN_BLANK := true
#TW_SCREEN_BLANK_ON_BOOT := true
TW_INCLUDE_FUSE_EXFAT := true
TW_INCLUDE_FUSE_NTFS := true
LC_ALL="C"
TW_DEVICE_VERSION := _Ferdian™ Inc
TW_ROUND_SCREEN := true
TWRP_NEW_THEME := true
TARGET_USE_CUSTOM_LUN_FILE_PATH := /config/usb_gadget/g1/functions/mass_storage.0/lun.%d/file
TARGET_RECOVERY_PIXEL_FORMAT := RGBX_8888
TW_OVERRIDE_SYSTEM_PROPS := \
    "ro.build.product;ro.build.fingerprint=ro.system.build.fingerprint;ro.build.version.incremental;ro.product.device=ro.product.system.device;ro.product.model=ro.product.system.model;ro.product.name=ro.product.system.name"
TW_USE_FSCRYPT_POLICY := 1
TW_LOAD_VENDOR_MODULES := "texfat.ko sec_touchscreen.ko sec_touchscreen_2.ko et580-int.ko tcs3490.ko"

# TWRP Debug Flags
TARGET_USES_LOGD := true
TWRP_INCLUDE_LOGCAT := true
TARGET_RECOVERY_DEVICE_MODULES += debuggerd
RECOVERY_BINARY_SOURCE_FILES += $(TARGET_OUT_EXECUTABLES)/debuggerd
TARGET_RECOVERY_DEVICE_MODULES += strace
RECOVERY_BINARY_SOURCE_FILES += $(TARGET_OUT_EXECUTABLES)/strace
#TWRP_EVENT_LOGGING := true

# Extras
BOARD_HAS_NO_REAL_SDCARD := true
TW_EXCLUDE_TWRPAPP := true
TW_USE_TOOLBOX := true
TW_USE_QCOM_HAPTICS_VIBRATOR := true
TW_SUPPORT_INPUT_AIDL_HAPTICS := true
USE_RECOVERY_INSTALLER := true
RECOVERY_INSTALLER_PATH := $(DEVICE_PATH)/installer