rgb.h

/*

  rgb.h - shared neopixel_rgb plugin symbols

  Part of grblHAL

  Copyright (c) 2022-2023 Terje Io

  Grbl is free software: you can redistribute it and/or modify
  it under the terms of the GNU General Public License as published by
  the Free Software Foundation, either version 3 of the License, or
  (at your option) any later version.

  Grbl is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  GNU General Public License for more details.

  You should have received a copy of the GNU General Public License
  along with Grbl.  If not, see <http://www.gnu.org/licenses/>.

  Copyright (c) 2023 Sienci Labs

  This file is part of the SuperLongBoard family of products.
  
   This source describes Open Hardware and is licensed under the "CERN-OHL-S v2"

   You may redistribute and modify this source and make products using
   it under the terms of the CERN-OHL-S v2 (https://ohwr.org/cern_ohl_s_v2.t). 
   This source is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY,
   INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A 
   PARTICULAR PURPOSE. Please see the CERN-OHL-S v2 for applicable conditions.
   
   As per CERN-OHL-S v2 section 4, should You produce hardware based on this 
   source, You must maintain the Source Location clearly visible on the external
   case of the CNC Controller or other product you make using this source.
  
   You should have received a copy of the CERN-OHL-S v2 license with this source.
   If not, see <https://ohwr.org/project/cernohl/wikis/Documents/CERN-OHL-version-2>.
   
   Contact for information regarding this program and its license
   can be sent through gSender@sienci.com or mailed to the main office
   of Sienci Labs Inc. in Waterloo, Ontario, Canada.

*/

#pragma once

#ifdef ARDUINO
#include "../../grbl/hal.h"
#include "../../grbl/protocol.h"
#include "../../grbl/state_machine.h"
#include "../../grbl/report.h"
#include "../../grbl/nvs_buffer.h"
#else
#include "grbl/hal.h"
#include "grbl/protocol.h"
#include "grbl/state_machine.h"
#include "grbl/report.h"
#include "grbl/nvs_buffer.h"
#endif

/*No connection:orange, Idle:white, Cycle/Running:green, Jogging:green, Hold:yellow,  Door:yellow, Homing:blue, Check:blue, Alarm:red, E-stop:red, Sleep:gray, Tool Change:purple*/

#if STATUS_LIGHT_ENABLE

#include "ws2812.h"

#define RGB_OFF     0 // All RGB Off
#define RGB_RED     1 // Red
#define RGB_GREEN   2 // Green
#define RGB_BLUE    3 // Blue
#define RGB_YELLOW  4 // Red + Green
#define RGB_MAGENTA 5 // Red + Bue
#define RGB_CYAN    6 // Green + Blue
#define RGB_WHITE   7 // Red + Green + Blue
#define RGB_ORANGE  8 // Red + Green + More Red
#define RGB_GREY    9 // Red + Green + Blue but dimmer

// Blink times in ms
#define RGB_SLOW    1000
#define RGB_FAST    750
#define RGB_PULSE   500

void init_neopixels (void);
void update_neopixels (uint8_t ring_color, uint8_t rail_color);

#endif

/**/