Customizations

Setting Name	Description	Default
ENABLE_ALT_SQUELCH	Port of optimized UV-K5 squelch system from various firmwares	1
ENABLE_AM_FIX	Experimental port of the great UV-K5 AM fix from OneOfEleven	1
ENABLE_FM_RADIO	FM broadcast radio mode	1
ENABLE_KEEP_MONITOR_MODE_UP_DN	Keep monitor mode when pressing up/down keys to change frequency	0
ENABLE_LTO	Link Time Optimization	0
ENABLE_NOAA	NOAA weather channels (always re-set the sidekeys actions from menu after modifying the available actions)	1
ENABLE_OPTIMIZED	Compiler options to reduce binary size	1
ENABLE_REGISTER_EDIT	Enable the register editor. Assign a key action to use.	0
ENABLE_RX_BAR	Display RSSI level bar when RX	1
ENABLE_SCANLIST_DISPLAY	Display scanlists membership instead of empty RSSI grid in channel mode when radio not RX/TX	1
ENABLE_SPECTRUM	Spectrum frequency view (assign to a shortcut key to access)	1
ENABLE_SPECTRUM_PRESETS	Band presets for Spectrum mode (ENABLE_SPECTRUM required to be enabled)	1
ENABLE_STATUS_BAR_LINE	Display status bar separator line	0
ENABLE_SLOWER_RSSI_TIMER	Slower update rate of RSSI to reduce screen updates that cause reports of clicking around 444-446MHz	1
ENABLE_TX_BAR	Display vox level bar when TX	1
MOTO_STARTUP_TONE	Moto XPS startup beeps	1
UART_DEBUG	UART debug output	0

UART_DEBUG

Enables UART debug output. Useful if you pretend to develop the firmware.

MOTO_STARTUP_TONE

ENABLE_AM_FIX

ENABLE_ALT_SQUELCH

ENABLE_STATUS_BAR_LINE

Default: OFF
Display a yellow line dividing the status bar from the rest of the UI.

ENABLE_NOAA

ENABLE_SPECTRUM

ENABLE_SPECTRUM_PRESETS (ENABLE_SPECTRUM required)

ENABLE_FM_RADIO

ENABLE_LTO

Default: OFF
Link time optimization. Should yield smaller size binaries. Breaks RX meter and VOX.

ENABLE_OPTIMIZED

ENABLE_SLOWER_RSSI_TIMER

Default: ON Increases the interval between display updates. This helps with knocking-like interferences around PMR446 frequencies.

ENABLE_RX_BAR

Default: ON Change to 0 to disable displaying the RX RSSI indicator bar.

ENABLE_TX_BAR

Default: ON Change to 0 to disable displaying the TX audio level bar.

ENABLE_SCANLIST_DISPLAY

Default: OFF
Display scanlists membership instead of empty RSSI grid in channel mode while radio is not RX/TX

ENABLE_KEEP_MONITOR_MODE_UP_DN

Default: OFF
Keep monitor mode when pressing up/down keys to change frequency/memory