[Audio] Switch to HDMI not saving in Hooper 4.2.1

[dus10]

My Raspberry Pi is connected to a tv via hdmi. Every time I boot up Kano (v4.2.1) there is no audio. I go to the settings main menu and the audio section says it is set to hdmi. However, when I click to open the audio setting the radio button is set to Speaker and not TV. I switch it to TV and the audio then begins to work on the TV. I reboot when it asks me to but the same experience happens again. The setting to make the TV (hdmi) the default audio never saves correctly.

Raspberry Pi 3 Model B Rev 1.2
a22082 (3b)

[nothingneko]

Maybe Try Changing It In raspi-config Open A Terminal (Not Terminal Quest) And Type sudo raspi-configThe Audio Settings Are In Advanced Options

[pnjohnson]

Did you ever resolved this? Having the same problem. Also changes to display/overscan does not persist.

[idesignstuff]

Same exact problem here. Pi3b.

[nothingneko]

Have you guys tried the raspi-config method I reccomended?

[yeshpi]

Hi, try to add device number in the "/etc/asound.conf " file.
To get device number for the hdmi ,
use "aplay -l"
Then reboot . Check out the images

[yeshpi]

This solves my problem with hdmi