OPtic 6 to corona cr8d and Nano not getting signal to VJoy

[Mattjames76]

I first tried with an FTDI but then i read about PPM signal which my transmitter is. So i bought a nano and flashed with the ppm to ibus script.

I get no signal whatsover to Vjoy. Tried all the protocols. I even tried EEPROM - Clear.

At a complete loss.

Also my TX light was solid with EEPROM but with PPM to IBUS only power light is on.

[Cleric-K]

Are you sure that you have PPM signal at all? Have you tested this receiver in some way?

[Mattjames76]

Yes it works.  Binder to my spitfire.  No issues Sent from Yahoo Mail on Android On Wed., 28 Feb. 2024 at 1:02 p.m., ***@***.***> wrote: Are you sure that you have PPM signal at all? Have you tested this receiver in some way? — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you authored the thread.Message ID: ***@***.***>

[Mattjames76]

I've tested the corona before and after to see if i fried the tx. It still binds and I still get throttle, rudder and elevator movement.

From what Ive read the cr8d puts out a ppm signal? so I'm at a loss on what i could be. should I get another nano?

[Mattjames76]

Ended up getting a flysky. Everything works

[Cleric-K]

OK, sorry that I couldn't be of much help but it is difficult to debug these things from a distance.

On the bright side, using real digital IBUS protocol is much more responsive. PPM introduces some delay, so the step to digital would have been needed at some point anyway.

[Mattjames76]

No worries. I'm stubborn and really wanted to use the optic. Spent time upgrading it to 2.4. It was only used once 20 years ago. But happy with flysky now.